fixed filling stations for oil

Plate mounted unit with pump, nozzle and flow meter for wall or tank attachment. The stationary ServiceCenter is ideal for changing motor oils in large machines and plants and to be employed with a diversity of fluids as well.

Function

The pump is equipped with two suction and two pressure hoses. These hoses are connected to the motor of the CHP unit, to a used oil tank and to a tank with new motor oil. The set up remains the same no matter if used oil is removed or fresh oil is delivered. Turning the multifunctional valves the four pipes are opended or closed accordingly.


Features

  • motor oil change in CHP units
  • extraction of waste oil from motors, gear boxes and hydraulic equipment
  • extraction of cooling lubricants
  • maintenance of machines

Additional cleaning effect

Unlike removing motor oil through the oil drain plug, pumping out oil leads to an increased removal of sedimentation inside the motor. The higher flow rate creates a suction effect and extracts dirt. The pumps handles solids without being affected by it.


please contact our team for more details

ZUWA Team

 +49 8682 8934-50
 export@zuwa.de

Flow rate (based on motor oil 10W40 at 20°C) 18 l/min
Discharge pressure 3 bar
Impeller material Viton® (FKM)
Material Viton® (FKM)
Type of sealing technologie Shaft sealing ring
Nominal voltage 230 V

CHP Oil Chaning Unit, stationary, on plate

CHP Oil Chaning Unit, stationary, on plate
Nominal voltage 230 V
Flow rate 25 l/min
Discharge pressure 6 bar

Oil Transfer Kit - VISCOMAT 70 , 230 V

Flow rate 25 l/min
Discharge pressure 6 bar
Nominal voltage 400 V

Oil Transfer Kit - VISCOMAT 70 , 400 V

Discharge pressure 6 bar
Flow rate 25 l/min
Nominal voltage 230 V

Small Tank Combination Oil Filling Set

Discharge pressure 6 bar
Flow rate 25 l/min
Nominal voltage 230 V

Small Tank Combination Oil Filling Set

fixed filling stations for oil

fixed filling stations for oil
fixed filling stations for oil

Plate mounted unit with pump, nozzle and flow meter for wall or tank attachment. The stationary ServiceCenter is ideal for changing motor oils in large machines and plants and to be employed with a diversity of fluids as well.

fixed filling stations for oil

fixed filling stations for oil
fixed filling stations for oil

Plate mounted unit with pump, nozzle and flow meter for wall or tank attachment. The stationary ServiceCenter is ideal for changing motor oils in large machines and plants and to be employed with a diversity of fluids as well.