VELO UP - a low intake pump for indoor and outdoor applications

Electronic pump drainage with vertical adjustable (automatic or manual) with removable filter for suction up to 2/3 mm. The adjustment slider of the probes, allows you to vary the level of on-off of the pump, this feature increases the versatility of installation.

The vertical delivery and the electronic float make it a pump suitable for use in wells of small dimensions. Thermal-amperometersc protection incorporated and condenser permanently connected


Application

from 1 to 15 m3/h-with prevalence up to 10 meters.

  • from 0° C to +35° C for domestic use
  • maximum immersion depth: 7 m
  • minimum depth of draft: 60 mm
  • maximum containing solids: 10 mm

Features

  • motor, rotor shaft and screws in stainless steel
  • triple O-ring seal with interposed oil chamber
  • stator in a sealed stainless steel enclosure
  • asynchronous submersible motor for continuous operation

Characteristic curves

Kennlinien der Schmutzwasserpumpe VELO UP
Newsletter

Sign up for our newsletter

subscribe now
Downloads

VELO UP 300, 230 V Submersible Waste Water Pump

VELO UP 300, 230 V
Art. Nr. 165300
Submersible Waste Water Pump flow rate max. litres 150 l/min flow rate max. m³ 9 m³/h max. pressure 0,8 bar Outlet 1 ¼“ Impeller type Technopolymer Max. size of solids 10 mm, max. fluid temperature 35°C Max. depth 7 m Material pump housing Technopolymer Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,21 kW, Rated current (AC) 1,5 A Material motorshaft stainless steel Protection class IP68 , Operating mode S1, Isolationclass F Motor protection (thermal) yes 10 m cable with plug Construction size 297 x 160 mm weight 5,8 kg Adjustable slides to select switch on point (min.105 mm, max. 255 mm) For automatical or manual use. With removable filter (for suction down to 2-3mm)

VELO UP 600, 230 V Submersible Waste Water Pump

VELO UP 600, 230 V
Art. Nr. 165600
Submersible Waste Water Pump flow rate max. litres 225 l/min flow rate max. m³ 13,5 m³/h max. pressure 1 bar Outlet 1 ¼“ Impeller type Technopolymer Max. size of solids 10 mm, max. fluid temperature 35°C Max. depth 7 m Material pump housing Technopolymer Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,52 kW, Rated current (AC) 3,5 A Material motorshaft stainless steel Protection class IP68 , Operating mode S1, Isolationclass F Motor protection (thermal) yes 10 m cable with plug Construction size 324 x 160 weight 7,3 kg Adjustable slides to select switch on point (min.140, max. 290mm) For automatical or manual use. With removable filter (for suction down to 2-3mm)