VORTEX ATEX - ATEX approved

VORTEX Pumps now also ATEX approved for application in biogas sector and other areas with potentially explosive atmosphere – intended for use in zone 1 and 2.

  • max. density of fluid: 1100 kg/m³
  • fluid temperature max. 40°C
  • pH value: 6 - 11

Application

Submersible waste water pumps are frequently used in biogas plants to remove condensed water from the dead well and return it to the fermenter. Biogas plants are classified as areas with potentially explosive atmosphere. This is why VORTEX pumps are now launched meeting the health and safety requirements of the ATEX directive.

Features

  • pump housing and impeller made of grey cast iron
  • motor in oil bath (with thermal motor protection for 230 V to 1.5 kW)
  • ATEX certifi cation number: Eexd-IIB-T3-II-2-G
  • rotary seal made of silicium carbide
  • shaft made of stainless steel
  • cable length 10 m
ON OPTION: ATEX approved float switch
Newsletter

Sign up for our newsletter

subscribe now
Downloads

VORTEX 100 ATEX, 230 V ATEX Submersible Waste Water Pump

VORTEX 100 ATEX, 230 V
Art. Nr. 165017ATEXOS
ATEX Submersible Waste Water Pump flow rate max. litres 450 l/min flow rate max. m³ 27,0 m³/h max. pressure 0,7 bar Outlet 2" ft (DN 50) Impeller type cast iron For fluids with solids, max. size 42 mm Temperature max. 40 °C Max. fluid density 1000 kg/M³, ph 6-11 Material pump housing cast iron Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,75 kW, Rated current (AC) 7,0 A rotation max. 2810 min-1 Material motorshaft stainless steel X30Cr13 Protection class IP68 , Insolationclass F 10 m cable without plug ATEX Eexd-IIB-T3-II-2-G Construction size 457 x 300 mm weight 31 kg On option: Float Switch for VORTEX-ATEX, Art. 16501311EX

VORTEX 75 DP, 230 V ATEX ATEX Submersible Waste Water Pump

VORTEX 75 DP, 230 V ATEX
Art. Nr. 175013ATEXOS
ATEX Submersible Waste Water Pump without float switch flow rate max. litres 300 l/min flow rate max. m³ 18 m³/h max. pressure 0,6 bar Outlet 2" ft Impeller material cast iron Mechanical seal carbide/ceramic/viton pH range of pumped liquids 6-10 , Temperature max. 0-40 °C Suitable for rain, sewage and grey clean waters For fluids with solids max. size 50 mm Minimum fluid level: 0,1 m over pump housing Max. depth of mmersion 20 m Material pump housing cast iron Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,6 kW, Rated current (AC) 4,8 A rotation max. 2850 min-1 Material motorshaft stainless steel AISI 420 Protection class IP68 , Insulation class F 155°C Operating mode S2 10 m cable without plug ATEX II 2G Ex db IIB T4 Gb - Ex h IIB T4 Gb 0°C

VORTEX 75 DP, 400 V ATEX ATEX Submersible Waste Water Pump

VORTEX 75 DP, 400 V ATEX
Art. Nr. 1750134ATEXOS
ATEX Submersible Waste Water Pump without float switch flow rate max. litres 300 l/min flow rate max. m³ 18 m³/h max. pressure 0,6 bar Outlet 2" ft Impeller type cast iron, mechanical seal silicon carbide/ceramic/Viton pH range of pumped liquids 6-10 , Temperature max. 0-40 °C Suitable for rain, sewage and grey clean waters For fluids with solids max. size 50 mm Minimum fluid level: 0,1 m over pump housing Max. depth of mmersion 20 m Material pump housing cast iron Electric motor Voltage (AC) 400 V, Nominal frequency 50 Hz Nominal power 0,6 kW, Rated current (AC) 2,1 A rotation max. 2850 min-1 Material motorshaft stainless steel AISI 420 Protection class IP68 , Insulation class F 155°C Operating mode S2 10 m cable without plug ATEX II 2G Ex db IIB T4 Gb - Ex h IIB T4 Gb 0°C