waste water pump flat suction system for cistern

good value powerful little maintenance high durability

VELO UP - a low intake pump for indoor and outdoor applications

Electronic pump drainage with vertical adjustable (automatic or manual) with removable filter for suction up to 2/3 mm. The adjustment slider of the probes, allows you to vary the level of on-off of the pump, this feature increases the versatility of installation.

The vertical delivery and the electronic float make it a pump suitable for use in wells of small dimensions. Thermal-amperometersc protection incorporated and condenser permanently connected

from 1 to 15 m3/h-with prevalence up to 10 meters.

  • from 0° C to +35° C for domestic use
  • maximum immersion depth: 7 m
  • minimum depth of draft: 60 mm
  • maximum containing solids: 10 mm

Features

  • motor, rotor shaft and screws in stainless steel
  • triple O-ring seal with interposed oil chamber
  • stator in a sealed stainless steel enclosure
  • asynchronous submersible motor for continuous operation
please contact our team for more details
Förderdruck Fördermenge

VELO UP 300, 230 V Submersible Waste Water Pump

VELO UP 300, 230 V
Art. Nr. 165300
Submersible Waste Water Pump flow rate max. litres 150 l/min flow rate max. m³ 9 m³/h max. pressure 0,8 bar Outlet 1 ¼“ Impeller type Technopolymer Max. size of solids 10 mm, max. fluid temperature 35°C Max. depth 7 m Material pump housing Technopolymer Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,21 kW, Rated current (AC) 1,5 A Material motorshaft stainless steel Protection class IP68 , Operating mode S1, Isolationclass F Motor protection (thermal) yes 10 m cable with plug Construction size 297 x 160 mm weight 5,8 kg Adjustable slides to select switch on point (min.105 mm, max. 255 mm) For automatical or manual use. With removable filter (for suction down to 2-3mm)
Discharge pressure 0,8 bar
Flow rate 150 l/min

VELO UP 600, 230 V Submersible Waste Water Pump

VELO UP 600, 230 V
Art. Nr. 165600
Submersible Waste Water Pump flow rate max. litres 225 l/min flow rate max. m³ 13,5 m³/h max. pressure 1 bar Outlet 1 ¼“ Impeller type Technopolymer Max. size of solids 10 mm, max. fluid temperature 35°C Max. depth 7 m Material pump housing Technopolymer Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,52 kW, Rated current (AC) 3,5 A Material motorshaft stainless steel Protection class IP68 , Operating mode S1, Isolationclass F Motor protection (thermal) yes 10 m cable with plug Construction size 324 x 160 weight 7,3 kg Adjustable slides to select switch on point (min.140, max. 290mm) For automatical or manual use. With removable filter (for suction down to 2-3mm)
Flow rate 225 l/min
Discharge pressure 1 bar

You have probably already heard about the new data security laws in the EU..

 

Don’t worry! To make sure that you will recieve news about ZUWA, our novelties and exclusive offers in the future, you just have to confirm your mail address.

YOUR BENEFITS:

Register here!