Plate mounted unit with pump, nozzle and flow meter for wall or tank attachment. The stationary ServiceCenter is ideal for changing motor oils in large machines and plants and to be employed with a diversity of fluids as well.

Function

The pump is equipped with two suction and two pressure hoses. These hoses are connected to the motor of the CHP unit, to a used oil tank and to a tank with new motor oil. The set up remains the same no matter if used oil is removed or fresh oil is delivered. Turning the multifunctional valves the four pipes are opended or closed accordingly.


Features

  • motor oil change in CHP units
  • extraction of waste oil from motors, gear boxes and hydraulic equipment
  • extraction of cooling lubricants
  • maintenance of machines

Additional cleaning effect

Unlike removing motor oil through the oil drain plug, pumping out oil leads to an increased removal of sedimentation inside the motor. The higher flow rate creates a suction effect and extracts dirt. The pumps handles solids without being affected by it.


max. Fördermenge max. Förderdruck Nennspannung Werkstoff Impeller Typ Dichtung Werkstoff Dichtung

CHP Oil Chaning Unit, stationary, on plate Impellerpump UNISTAR/V 2000-B , 1400 min-1, 230 V

CHP Oil Chaning Unit, stationary, on plate
Art. Nr. 11231136332-BHKW
Impellerpump flow rate max. litres (based on motor oil 10W40 at 20°C) 18 l/min flow rate max. m³ 1,08 m³/h max. pressure 3 bar Inlet/outlet 1" ft Impeller Viton® (FKM) , Bush material Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 3,8 A rotation max. 1400 min-1, Material motorshaft 1.4404 Protection class IP55 , Operating mode S1 Motor protection (thermal) 130 Equipment/Accessories : - 2 Multifunktionshähne - Manual nozzle type 120 with digital flow meter K400 - Oil resistant Suction hoses: 1 x 1,5 m, 1" (NW 25), with drum adapter and foot valve 1 x 3m, ¾" (NW 19) 1 x 3m, 1" (NW 25) - Oil resistant discharge hoses: 1 x 4m, ½" (NW 13) 1 x 4m, ¾" (NW 19) weight Ca. 25 kg
Discharge pressure 3 bar
Flow rate (based on motor oil 10W40 at 20°C) 18 l/min
Impeller material Viton® (FKM)
Material Viton® (FKM)
Type of sealing technologie Shaft sealing ring
Nominal voltage 230 V

Oil Transfer Kit - VISCOMAT 70 , 230 V Oil pump with digital meter

Art. Nr. 120644
Self-Priming Vane Pump Viscomat 70-m flow rate max. litres 25 l/min flow rate max. m³ 1,5 m³/h max. pressure 6 bar Inlet/outlet 1" ft (without flange) For oil with viscosity max. 500 cSt Adjustable bypass valve Material pump housing cast iron Electric motor Voltage (AC) 230 V, Nominal frequency 50/60 Hz Nominal power 1,2/1,1 kW, Rated current (AC) 5,5/5,1 A Operating mode S1 , rotation max. 1470/1650 min-1 With cable and plug , Switch ON/OFF Equipment/Accessories : - 90° filter at pump inlet - Nozzle for oil with digital meter K400 - Nozzle holder - 1,5 m oil resistant suction hose 1" with foot valve - 4 m oil resistant discharge hose ¾" - Mounted on plate for wall fixing weight 15 kg
Discharge pressure 6 bar
Flow rate 25 l/min
Nominal voltage 230 V

Oil Transfer Kit - VISCOMAT 70 , 400 V Oil pump with digital meter

Art. Nr. 120646
Self Priming Vane Pump Viscomat 70-t flow rate max. litres 25 l/min flow rate max. m³ 1,5 m³/h max. pressure 6 bar Inlet/outlet 1" ft (without flange) For oil with max. viscosity 500 cSt Adjustable by-pass valve Material pump housing cast iron Electric motor Voltage (AC) 400 V, Nominal frequency 50 Hz Nominal power 0,8 kW, Rated current (AC) 2,3 A Operating mode S1 , rotation max. 1450 min-1 About 30 cm cable, without plug Equipment/Accessories : - 90° filter at pump inlet - Nozzle for oil with digital meter K400 - Nozzle holder - 1,5 m oil resistant suction hose 1" with foot valve - 4 m oil resistant discharge hose ¾" - Mounted on plate for wall fixing weight 15 kg
Nominal voltage 400 V
Discharge pressure 6 bar
Flow rate 25 l/min

Small Tank Combination Oil Filling Set 990 l - Oilpump, Nozzle w. Flow meter, Hose Reel

Art. Nr. 120841
Small tank 990 l with ADR approval Connection kit consists of: Foot valve 1", sieve for foot valve, 1", suction tube 1", Drum connector 2", elbow "i x 1"a, connection hose 1", screw fitting G1"x1"spout, Hose barb G1"x1"spout BAM approval Z-40.21-118 IBC approval no. UN 31 HA1/Y/..../D/SCHÜTZ1/BAM10104/0/1330 Viscomat 70, 230V max. 25 ltr./min., max. 6 bar KW 0,75 A: 4,6 rpm 1400 Nozzle for oil with digital flow meter K400, rigid Automatic hose reel 3/4" including. 8 m hose
Discharge pressure 6 bar
Nominal voltage 230 V
Flow rate 25 l/min

Small Tank Combination Oil Filling Set 990 l - Oilpump, Nozzle with Flow Meter

Art. Nr. 120840
Small tank 990 l with ADR approval Connection kit consists of: Foot valve 1", sieve for foot valve 1", suction tube 1", Drum connectior 2", angle 1"i x 1"a, connection hose 1"- srew fitting G1"x1"spout, Hose barb G1"x1"spout BAM approval no.Z-40.21-118 IBC approval no: UN 31 HA1/Y/..../D/SCHÜTZ1/BAM10104/0/1330 Oil pump VISCOMAT 70 mounted on plate for wall fixing, 90° filter at pump outlet, 1,5 m oil resistant suction hose ¾" with foot valvel, 4 m oil resistant discharge hose ½", nozzle for oil with digital flow meter K 400, mounting bracket for nozzle and discharge hose