Product Menu Icon

A multi-purpose pump designed for transferring clean or contaminated liquids. Not suitable for handling abrasive or corrosive fluids. With motor!

The impeller pump UNISTAR 2000 is a complete unit consisting of pump and motor.

We will advise you personally concerning your specific application and the corresponding Impellermaterials. Just call: +49 (0) 8682 / 8934-50.

Applicable:
  • filling solar collectors
  • irrigation
  • rain water harvesting
  • domestic water supply
  • drain flooded basements
  • decanting barrels
  • sewerage disposal
  • fuelling vehicles
  • draining waste oil
  • dispose off cooling lubricants
  • draining water beds
  • car wash
  • cleaning tanks
  • draining tanks
Fluids:
  • waste water
  • diesel fuel, biodiesel
  • vegetable oils
  • heating and motor oil
  • detergents
  • antifreeze
  • heat transfer fluid
  • cooling lubricants
Fördermenge Max. Drehzahl Typ Dichtung Nennspannung Werkstoff Dichtung Förderdruck Werkstoff Impeller

Drum Pump UNI 380-A , 230 V for drums diameter 340 to 380 mm , without meter

Drum Pump UNI 380-A , 230 V
Art. Nr. 120719
Impellerpump UNISTAR 2000-A, connection 1" mt flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 5 bar Inlet/outlet 1" mt Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Material pump housing aluminium IMgSi1 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 3,2 A rotation max. 2800 min-1 Protection class IP55 , Operating mode S1 Motor protection (thermal) 130 Cable / plug H07RN-F 2m Equipment/Accessories : - Manual nozzle - Nozzle holder - Drum bracket - AF2 connector 56x4 buttress 1" BSP with suction tube - Suction hose lenght 0,5 m, 1" - Discharge hose 3 m, 1"
Werkstoff Impeller Perbunan® (NBR)
Nennspannung 230 V
Werkstoff Dichtung Perbunan® (NBR)
Typ Dichtung Wellendichtring
Förderdruck 5 bar
Max. Drehzahl 2800 rpm
Fördermenge 30 l/min

Drum Pump UNI 380-B , 12/24 V for drums diameter 340 to 380 mm , without meter

Drum Pump UNI 380-B , 12/24 V
Art. Nr. 120720
Impellerpump UNISTAR 2000-B flow rate max. litres 12/25 l/min flow rate max. m³ 0,72/1,5 m³/h max. pressure 3 bar Inlet/outlet 1" mt Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Material pump housing Aluminium AlMgSi1 Electric motor Voltage (DC) 12/24 V Nominal power 0,35/0,45 kW Rated current (DC) starting current 17/20, operating current 12/15 A rotation max. 980/1700 min-1 Operating mode S1 5 m cable with plug, on/off-switch Equipment/Accessories : - Manual nozzle - Nozzle holder - Drum bracket - AF2 connector 56x4 buttress 1" BSP with suction tube - Suction hose lenght 0,5 m, 1" - Discharge hose 3 m, 1"
Max. Drehzahl 980/1700 rpm
Werkstoff Impeller Perbunan® (NBR)
Förderdruck 3 bar
Werkstoff Dichtung Perbunan® (NBR)
Fördermenge 16/32 l/min
Typ Dichtung Wellendichtring
Nennspannung 12/24 V

Drum Pump UNI 580-B , 12/24 V for drums diameter 540 to 580 mm , without meter

Drum Pump UNI 580-B , 12/24 V
Art. Nr. 120724
Impellerpump UNISTAR 2000-B flow rate max. litres 12/25 l/min flow rate max. m³ 0,72/1,5 m³/h max. pressure 3 bar Inlet/outlet 1" mt Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Material pump housing Aluminium AlMgSi1 Electric motor Voltage (DC) 12/24 V Nominal power 0,35/0,45 kW Rated current (DC) starting current 17/20, operating current 12/15 A rotation max. 980/1700 min-1 Protection class IP44 , Operating mode S1 5 m cable with plug, on/off-switch Equipment/Accessories : - Manual nozzle - Nozzle holder - Drum bracket - AF2 connector 56x4 buttress 1" BSP with suction tube - Suction hose lenght 0,5 m, 1" - Discharge hose 3 m, 1"
Nennspannung 12/24 V
Werkstoff Impeller Perbunan® (NBR)
Typ Dichtung Wellendichtring
Max. Drehzahl 980/1700 rpm
Förderdruck 3 bar
Werkstoff Dichtung Perbunan® (NBR)
Fördermenge 16/32 l/min

Drum Pump UNI 580-B , 230 V for drums diameter 540 to 580 mm , without meter

Drum Pump UNI 580-B , 230 V
Art. Nr. 120723
Impellerpump UNISTAR 2000-B flow rate max. litres 60 l/min flow rate max. m³ 3,6 m³/h max. pressure 5 bar Inlet/outlet 1" mt Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Material pump housing Aluminium AIMgSi1 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 4,3 A rotation max. 2800 min-1 Protection class IP55 , Operating mode S1 Motor protection (thermal) 130 Cable / plug H07RN-F 2m Equipment/Accessories : - Zapfpistole manuell - Zapfpistolenhalterung - Auflegeplatte für Fass - Sauganschluss SEC - Ansaugrohr Fass - Ansaugschlauch, Länge 0,5 m, 1" - Abfüllschlauch, Länge 3 m, 1"
Förderdruck 5 bar
Werkstoff Impeller Perbunan® (NBR)
Werkstoff Dichtung Perbunan® (NBR)
Nennspannung 230 V
Typ Dichtung Wellendichtring
Fördermenge 60 l/min
Max. Drehzahl 2800 rpm

Frequency converter on top of motor INVEOR alpha

Frequency converter on top of motor
Art. Nr. 170010
Supply voltage 230 Volt For recommended motor power 0,37 to 0,75 kW Rated current (DC) 6,9 A, 0,75 kW, IP65 EMV class C1 UL/CSA certified weight 1,5 kg Can be used for all 400 V motors in 0,37 - 0,55 - 0,75 kW

IBC-Pump Set UNI 380-A , 230 V for IBC tanks , without meter

IBC-Pump Set UNI 380-A , 230 V
Art. Nr. 120732
Impellerpump UNISTAR 2000-A flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 5 bar Inlet/outlet ¾“ mt Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 3,2 A rotation max. 2800 min-1 Protection class IP55 , Operating mode S1 Motor protection (thermal) 130 Cable / plug H07RN-F 2m Equipment/Accessories : - Manual nozzle - Nozzle holder - AF2 connector, 2" adapter for IBC, with suction tube - Suction hose 0,5 m, 1" - Discharge hose 3 m, 1" - Mounted on plate for hanging it on IBC container
Nennspannung 230 V
Werkstoff Impeller Perbunan® (NBR)
Werkstoff Dichtung Perbunan® (NBR)
Typ Dichtung Wellendichtring
Förderdruck 5 bar
Fördermenge 30 l/min
Max. Drehzahl 2800 rpm

IBC-Pump Set UNI 580-B , 230 V for IBC tanks , without meter

IBC-Pump Set UNI 580-B , 230 V
Art. Nr. 120733
Impellerpump UNISTAR 2000-B flow rate max. litres 60 l/min flow rate max. m³ 3,6 m³/h max. pressure 5 bar Inlet/outlet 1" mt Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 4,3 A rotation max. 2800 min-1 Protection class IP55 , Operating mode S1 Motor protection (thermal) 130 Cable / plug H07RN-F 2m Equipment/Accessories : - Manual nozzle - Nozzle holder - AF2 connector, 2" adapter for IBC, with suction tube - Suction hose 0,5 m, 1" - Discharge hose 3 m, 1" - Mounted on plate for hanging it on IBC container
Nennspannung 230 V
Max. Drehzahl 2800 rpm
Werkstoff Impeller Perbunan® (NBR)
Werkstoff Dichtung Perbunan® (NBR)
Typ Dichtung Wellendichtring
Förderdruck 5 bar
Fördermenge 60 l/min

Impeller/Sealing Kit EPDM® for UNISTAR 2000-C

Impeller/Sealing Kit EPDM®
Art. Nr. 1132112KIT
Equipment/Accessories : - Impeller EPDM®, polyamid bush, art. 11012402, 3 pcs. - O-Rings 56-2, EPDM®, art. 80151, 3 pcs. - Rotary Shaft seal EPDM®, art. 80540, 1 pcs. weight 0,090 kg
Werkstoff Dichtung EPDM
Werkstoff Impeller EPDM
Typ Dichtung O-Ring

Impeller/Sealing Kit EPDM® for UNISTAR/COMBISTAR 2000-A

Impeller/Sealing Kit EPDM®
Art. Nr. 1112112KIT
Equipment/Accessories : - Impeller EPDM®, polyamid bush, art. 11012402, 1 pcs. - O-Rings 56-2, EPDM®, art. 80151, 3 pcs. - Rotary Shaft seal EPDM®, art. 80540, 1 pcs. On option: Impeller changing tool, art. 11012400 weight 0,040 kg
Werkstoff Impeller EPDM
Werkstoff Dichtung EPDM
Typ Dichtung O-Ring

Impeller/Sealing Kit EPDM® for UNISTAR/COMBISTAR 2000-B

Impeller/Sealing Kit EPDM®
Art. Nr. 1122112KIT
Equipment/Accessories : - Impeller EPDM® type B, polyamid bush, art. 11012413, 1 pcs. - O-Rings 56-2, EPDM®, art. 80151, 3 pcs. - Rotary Shaft seal EPDM®, art. 80540, 1 pcs. On option: Impeller changing tool, art. 11012400 weight 0,040 kg
Werkstoff Dichtung EPDM
Typ Dichtung O-Ring
Werkstoff Impeller EPDM

Impeller/Sealing Kit Perbunan® (NBR) for UNISTAR 2000-C

Impeller/Sealing Kit Perbunan® (NBR)
Art. Nr. 1131111KIT
Equipment/Accessories : - Impeller Perbunan®, polyamid bush, art. 11012909, 1 pcs. - O-Rings 56-2, Perbunan®, art. 80003, 3 pcs. - Rotary Shaft seal Perbunan® , art. 80537, 1 pcs. - O-Ring 54-2, Perbunan®, art. 800054N, 1 pcs. weight 0,090 kg
Werkstoff Dichtung Perbunan® (NBR)
Typ Dichtung Wellendichtring
Werkstoff Impeller Perbunan® (NBR)

Impeller/Sealing Kit Perbunan® (NBR) for UNISTAR/COMBISTAR 2000-A

Impeller/Sealing Kit Perbunan® (NBR)
Art. Nr. 1111111KIT
Equipment/Accessories : - Impeller Perbunan®, polyamid bush, art. 11012909, 1 pcs. - O-Rings 56-2, Perbunan®, art. 80003, 3 pcs. - Rotary Shaft seal Perbunan® , art. 80537, 1 pcs. On option: Impeller changing tool, art. 11012400 weight 0,040 kg
Werkstoff Impeller Perbunan® (NBR)
Werkstoff Dichtung Perbunan® (NBR)
Typ Dichtung Wellendichtring

Impeller/Sealing Kit Perbunan® (NBR) for UNISTAR/COMBISTAR 2000-B

Impeller/Sealing Kit Perbunan® (NBR)
Art. Nr. 1121111KIT
Equipment/Accessories : - Impeller Perbunan® type B polyamid bush, art. 11012912, 1 pcs. - O-Rings 56-2, Perbunan®, art. 80003, 3 pcs. - Rotary Shaft seal Perbunan® , art. 80537, 1 pcs. On option: Impeller changing tool, art. 11012400 weight 0,040 kg
Werkstoff Impeller Perbunan® (NBR)
Werkstoff Dichtung Perbunan® (NBR)
Typ Dichtung Wellendichtring

Impeller/Sealing Kit TPU Impeller for UNISTAR 2000-C

Impeller/Sealing Kit TPU Impeller
Art. Nr. 1139113KIT
Equipment/Accessories : - Impeller TPU, polyamid bush, art. 11012301, 3 pcs. - O-Rings 56-2, Viton®, art. 80150, 3 pcs. - Rotary Shaft seal Viton® , art. 80538, 1 pcs. - O-Ring 54-2, Viton®, art. 800054V, 1 pcs. weight 0,090 kg
Werkstoff Impeller TPU (nicht f.L-/R-Lauf!)
Werkstoff Dichtung Viton® (FKM)
Typ Dichtung Wellendichtring

Impeller/Sealing Kit TPU Impeller for UNISTAR/COMBISTAR 2000-A

Impeller/Sealing Kit TPU Impeller
Art. Nr. 1119113KIT
Equipment/Accessories : - Impeller TPU, polyamid bush, art. 11012301, 1 pcs. - O-Rings 56-2, Viton®, art. 80150, 3 pcs. - Rotary Shaft seal Viton® , art. 80538, 1 pcs. On option: Impeller changing tool, art. 11012400 weight 0,040 kg
Werkstoff Impeller TPU (nicht f.L-/R-Lauf!)
Werkstoff Dichtung Viton® (FKM)
Typ Dichtung Wellendichtring

Impeller/Sealing Kit TPU Impeller for UNISTAR/COMBISTAR 2000-B

Impeller/Sealing Kit TPU Impeller
Art. Nr. 1129113KIT
Equipment/Accessories : - Impeller TPU, polyamid bush, art. 11012301, 2 pcs. - O-Rings 56-2, Viton®, art. 80150, 3 pcs. - Rotary Shaft seal Viton® , art. 80538, 1 pcs. On option: Impeller changing tool, art. 11012400 weight 0,040 kg
Werkstoff Dichtung Viton® (FKM)
Typ Dichtung Wellendichtring
Werkstoff Impeller TPU (nicht f.L-/R-Lauf!)

Impeller/Sealing Kit Viton® (FKM) for UNISTAR 2000-C

Impeller/Sealing Kit Viton® (FKM)
Art. Nr. 1133113KIT
Equipment/Accessories : - Impeller Viton®, polyamid bush, art. 11012810, 3 pcs. - O-Rings 56-2, Viton®, art. 80150, 3 pcs. - Rotary Shaft seal Viton® , art. 80538, 1 pcs. weight 0,090 kg
Werkstoff Impeller Viton® (FKM)
Werkstoff Dichtung Viton® (FKM)
Typ Dichtung Wellendichtring

Impeller/Sealing Kit Viton® (FKM) for UNISTAR/COMBISTAR 2000-A

Impeller/Sealing Kit Viton® (FKM)
Art. Nr. 1113113KIT
Equipment/Accessories : - Impeller Viton®, polyamid bush, art. 11012810, 1 pcs. - O-Rings 56-2, Viton®, art. 80150, 3 pcs. - Rotary Shaft seal Viton® , art. 80538, 1 pcs. On option: Impeller changing tool, art. 11012400 weight 0,040 kg
Werkstoff Dichtung Viton® (FKM)
Werkstoff Impeller Viton® (FKM)
Typ Dichtung Wellendichtring

Impeller/Sealing Kit Viton® (FKM) for UNISTAR/COMBISTAR 2000-B

Impeller/Sealing Kit Viton® (FKM)
Art. Nr. 1123113KIT
Equipment/Accessories : - Impeller Viton®, polyamid bush, art. 11012810, 2 pcs. - O-Rings 56-2, Viton®, art. 80150, 3 pcs. - Rotary Shaft seal Viton® , art. 80538, 1 pcs. On option: Impeller changing tool, art. 151875 weight 0,040 kg
Werkstoff Dichtung Viton® (FKM)
Werkstoff Impeller Viton® (FKM)
Typ Dichtung Wellendichtring

UNISTAR 2000-A, 1400 min-1, 230 V Impellerpump with motor, cable and plug

UNISTAR 2000-A, 1400 min-1, 230 V
Art. Nr. 11111116322
Impellerpump flow rate max. litres 15 l/min flow rate max. m³ 0,9 m³/h max. pressure 4 bar Inlet/outlet ¾" mt Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 3,2 A Starting capacitor 40 µF Operating capacitor 16 µF rotation max. 1400 min-1 Material motorshaft 1.4104 Protection class IP55, Operating mode S1 weight 9,4 kg
Nennspannung 230 V
Max. Drehzahl 1400 rpm
Werkstoff Impeller Perbunan® (NBR)
Werkstoff Dichtung Perbunan® (NBR)
Förderdruck 4 bar
Typ Dichtung Wellendichtring
Fördermenge 15 l/min

UNISTAR 2000-A, 1400 min-1, 230/400 V Impellerpump with motor, cable and plug

UNISTAR 2000-A, 1400 min-1, 230/400 V
Art. Nr. 11111117322
Impellerpump flow rate max. litres 15 l/min flow rate max. m³ 0,9 m³/h max. pressure 4 bar Inlet/outlet ¾" aG Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Electric motor Voltage (AC) 230/400 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 2/1,15 A rotation max. 1400 min-1 Material motorshaft 1.4104 Protection class IP55, Operating mode S1 weight 9,4 kg
Werkstoff Dichtung Perbunan® (NBR)
Max. Drehzahl 1400 rpm
Nennspannung 230/400 V
Werkstoff Impeller Perbunan® (NBR)
Typ Dichtung Wellendichtring
Förderdruck 4 bar
Fördermenge 15 l/min

UNISTAR 2000-A, 2800 min-1, 230 V Impellerpump with motor, cable and plug

UNISTAR 2000-A, 2800 min-1, 230 V
Art. Nr. 110120M
Impellerpump flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 5 bar Inlet/outlet ¾" mt Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 3,2 A Starting capacitor 40 µF Operating capacitor 20 µF rotation max. 2800 min-1 Material motorshaft 1.4104 Protection class IP55, Operating mode S1 weight 9,4 kg
Werkstoff Impeller Perbunan® (NBR)
Nennspannung 230 V
Werkstoff Dichtung Perbunan® (NBR)
Typ Dichtung Wellendichtring
Max. Drehzahl 2800 rpm
Förderdruck 5 bar
Fördermenge 30 l/min

UNISTAR 2000-A, 2800 min-1, 230/400 V Impellerpump with motor, cable and plug

UNISTAR 2000-A, 2800 min-1, 230/400 V
Art. Nr. 11111117321
Impellerpump flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 5 bar Inlet/outlet ¾" mt Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230/400 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 1,9/1,1 A rotation max. 2800 min-1 Material motorshaft 1.4404 Protection class IP55, Operating mode S1 weight 9,4 kg
Werkstoff Impeller Perbunan® (NBR)
Werkstoff Dichtung Perbunan® (NBR)
Typ Dichtung Wellendichtring
Nennspannung 230/400 V
Förderdruck 5 bar
Max. Drehzahl 2800 rpm
Fördermenge 30 l/min

UNISTAR 2000-A, GLRD, 2800 min-1, 230 V Impellerpump with motor, cable and plug

UNISTAR 2000-A, GLRD, 2800 min-1, 230 V
Art. Nr. 11111256321
Impellerpumpe flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 5 bar Inlet/outlet ¾" mt Impeller Perbunan® (NBR) , Buchse Polyamid Mechanical seal Carbon/Keramik/FKM Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 3,2 A Starting capacitor 40 µF Operating capacitor 20 µF rotation max. 2800 min-1 Protection class IP55, Operating mode S1 Material motorshaft 1.4104 weight 9,4 kg
Max. Drehzahl 2800 rpm
Nennspannung 230 V
Typ Dichtung Gleitringdichtung
Werkstoff Impeller Perbunan® (NBR)
Förderdruck 5 bar
Werkstoff Dichtung Perbunan® (NBR)
Fördermenge 30 l/min

UNISTAR 2000-A, GLRD, 2800 min-1, 230/400 V Impellerpump with motor, cable and plug

UNISTAR 2000-A, GLRD, 2800 min-1, 230/400 V
Art. Nr. 11111237321
Impellerpumpe flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 5 bar Inlet/outlet ¾" mt Impeller Perbunan® (NBR) , Buchse Polyamid Mechanical seal Carbon/Keramik/FKM Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230/400 V, Rated current (AC) 1,9/1,1 A Nominal power 0,37 kW, rotation max. 2800 min-1 Protection class IP55 , Operating mode S1 Material motorshaft 1.4404 weight 9,4 kg
Nennspannung 230/400 V
Typ Dichtung Gleitringdichtung
Max. Drehzahl 2800 rpm
Werkstoff Dichtung Perbunan® (NBR)
Förderdruck 5 bar
Werkstoff Impeller Perbunan® (NBR)
Fördermenge 30 l/min

UNISTAR 2000-A/PT, 1500 min-1, 24 V Impellerpump with DC motor CEM

Art. Nr. 11111132412
Impellerpump flow rate max. litres 15 l/min flow rate max. m³ 0,9 m³/h max. pressure 4 bar Inlet/outlet ¾" mt Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 With pump carrier Electric motor CEM Voltage (DC) 24 V Nominal power 0,25 kW, Rated current (DC) 16 A rotation max. 1500 min-1 Motorshaft N-WE 14x30mm Protection class IP55 , Operating mode S1 Electrical connection Control board Colour RAL 9005 black weight 9,2 kg
Max. Drehzahl 1500 rpm
Nennspannung 24 V
Förderdruck 4 bar
Fördermenge 15 l/min
Werkstoff Impeller Perbunan® (NBR)
Werkstoff Dichtung Viton® (FKM)
Typ Dichtung Wellendichtring

UNISTAR 2000-A/PT, 3000 min-1, 12 V Impellerpump with DC motor type KEB

UNISTAR 2000-A/PT, 3000 min-1, 12 V
Art. Nr. 11111111521
Impellerpump flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 5 bar Inlet/outlet ¾" mt Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 With pump carrier Electric motor Voltage (DC) 12 V Nominal power 0,35/0,5 kW, Rated current (DC) 42/59 A rotation max. 3000 min-1 Rotation direction left/right Motorshaft N-WE 11x30 Protection class IP44 , Operating mode S2 Electrical connection Control board weight 9,2 kg
Max. Drehzahl 3000 rpm
Werkstoff Impeller Perbunan® (NBR)
Werkstoff Dichtung Perbunan® (NBR)
Typ Dichtung Wellendichtring
Förderdruck 5 bar
Nennspannung 12 V
Fördermenge 30 l/min

UNISTAR 2000-A/PT, 3000 min-1, 24 V Impellerpump with DC motor CEM

UNISTAR 2000-A/PT, 3000 min-1, 24 V
Art. Nr. 11111112411
Impellerpumpe flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 5 bar Inlet/outlet ¾" mt Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 With pump carrier Electric motor CEM Voltage (DC) 24 V Nominal power 0,25 kW, Rated current (DC) 18 A rotation max. 3000 min-1 Motorshaft N-WE 14x30 Protection class IP54 , Operating mode S1
Werkstoff Impeller Perbunan® (NBR)
Werkstoff Dichtung Perbunan® (NBR)
Typ Dichtung Wellendichtring
Nennspannung 24 V
Förderdruck 5 bar
Max. Drehzahl 3000 rpm
Fördermenge 30 l/min

UNISTAR 2000-B, 1400 min-1, 230 V Impellerpump with motor, cable and plug

UNISTAR 2000-B, 1400 min-1, 230 V
Art. Nr. 11211116332
Impellerpump Unistar 2000-B flow rate max. litres 30 l/min flow rate max. m³ 1,6 m³/h max. pressure 4 bar Inlet/outlet 1" mt Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 3,8 A Starting capacitor 40 µF Operating capacitor 16 µF rotation max. 1400 min-1 Material motorshaft 1.4104 Protection class IP55 Motor protection (thermal) 130 weight 10 kg
Werkstoff Dichtung Perbunan® (NBR)
Werkstoff Impeller Perbunan® (NBR)
Typ Dichtung Wellendichtring
Nennspannung 230 V
Max. Drehzahl 1400 rpm
Förderdruck 4 bar
Fördermenge 30 l/min

UNISTAR 2000-B, 1400, 230/400 V Impellerpump with motor, cable and plug

UNISTAR 2000-B, 1400, 230/400 V
Art. Nr. 11211117332
Impellerpump Unistar 2000-B flow rate max. litres 30 l/min flow rate max. m³ 1,6 m³/h max. pressure 4 bar Inlet/outlet 1" mt Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230/400 Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 2/1,6 A rotation max. 1400 min-1 Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 weight 10 kg
Werkstoff Dichtung Perbunan® (NBR)
Typ Dichtung Wellendichtring
Nennspannung 230/400 V
Max. Drehzahl 1400 rpm
Förderdruck 4 bar
Fördermenge 30 l/min
Werkstoff Impeller Perbunan® (NBR)

UNISTAR 2000-B, 2800 min-1, 230 V Impellerpump with motor, cable and plug

UNISTAR 2000-B, 2800 min-1, 230 V
Art. Nr. 110130M
Impellerpump Unistar 2000-B flow rate max. litres 60 l/min flow rate max. m³ 3,6 m³/h max. pressure 5 bar Inlet/outlet 1" mt Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 4,3 A Starting capacitor 40 µF Operating capacitor 20 µF rotation max. 2800 min-1 Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 Motor protection (thermal) 130 weight 10 kg
Nennspannung 230 V
Max. Drehzahl 2800 rpm
Werkstoff Impeller Perbunan® (NBR)
Werkstoff Dichtung Perbunan® (NBR)
Typ Dichtung Wellendichtring
Fördermenge 60 l/min
Förderdruck 5 bar

UNISTAR 2000-B, 2800 min-1, 230/400 V Impellerpump with motor, cable and plug

UNISTAR 2000-B, 2800 min-1, 230/400 V
Art. Nr. 11211117331
Impellerpump Unistar 2000-B flow rate max. m³ 3,6 m³/h flow rate max. litres 60 l/min max. pressure 5 bar Inlet/outlet 1" mt Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230/400 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 2,4/1,4 A rotation max. 2800 min-1 Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 weight 9,6 kg
Werkstoff Dichtung Perbunan® (NBR)
Typ Dichtung Wellendichtring
Nennspannung 230/400 V
Max. Drehzahl 2800 rpm
Förderdruck 5 bar
Werkstoff Impeller Perbunan® (NBR)
Fördermenge 60 l/min

UNISTAR 2000-B, 980/1700 min-1, 12/24 V Impellerpump with DC motor type Power Tronic

Art. Nr. 11211111312
Impellerpump flow rate max. litres 16/32 l/min flow rate max. m³ 0,96/1,92 m³/h max. pressure 5 bar Inlet/outlet 1" mt Impeller Perbunan® (NBR) , Bush material Polyamid Material Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Power Tronic Voltage (DC) 12/24 V Nominal power 0,35/0,45 kW Rated current (DC) starting current 17/20, operating current 12/15 A rotation max. 980/1700 min-1 Motorshaft S-WE 14x58,5 Protection class IP44 , Operating mode S1 5 m cable and on/off switch weight 3,1 kg
Förderdruck 5 bar
Werkstoff Impeller Perbunan® (NBR)
Max. Drehzahl 980/1700 rpm
Fördermenge 16/32 l/min
Nennspannung 12/24 V
Typ Dichtung Wellendichtring
Werkstoff Dichtung Perbunan® (NBR)

UNISTAR 2000-B/PT, 1500 min-1, 12 V Impellerpump with DC motor Creusen

Art. Nr. 11211111422
Impellerpump flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 4 bar Inlet/outlet 1" mt Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 With pump carrier Electric motor Voltage (DC) 12 V Nominal power 0,37 kW, Rated current (DC) 50 A rotation max. 1500 min-1 Motorshaft N-WE 14x30 Protection class IP54 , Operating mode S1 Electrical connection Control board weight 9,4 kg
Werkstoff Impeller Perbunan® (NBR)
Werkstoff Dichtung Perbunan® (NBR)
Typ Dichtung Wellendichtring
Nennspannung 12 V
Fördermenge 30 l/min
Förderdruck 4 bar
Max. Drehzahl 1500 rpm

UNISTAR 2000-B/PT, 3000 min-1, 12 V Impellerpump with DC motor type KEB

UNISTAR 2000-B/PT, 3000 min-1, 12 V
Art. Nr. 11211111531
Impellerpump flow rate max. litres 60 l/min flow rate max. m³ 3,6 m³/h max. pressure 5 bar Inlet/outlet 1" mt Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 With pump carrier Electric motor Voltage (DC) 12 V Nominal power 0,6/0,8 kW, Rated current (DC) 71/94 A rotation max. 3000 min-1 Rotation direction left/right Motorshaft N-WE 14x30 Protection class IP44 , Operating mode S2 Electrical connection Control board weight 10,6 kg
Werkstoff Impeller Perbunan® (NBR)
Max. Drehzahl 3000 rpm
Werkstoff Dichtung Perbunan® (NBR)
Typ Dichtung Wellendichtring
Förderdruck 5 bar
Fördermenge 60 l/min
Nennspannung 12 V

UNISTAR 2000-B/PT, FU, 230 Volt Impellerpump with integrated frequency converter

Art. Nr. 110130LSFU
Impellerpump flow rate max. litres 60 l/min flow rate max. m³ 3,6 m³/h max. pressure 5 bar Inlet/outlet 1" aG Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 With pump carrier and Rotex coupling Electric motor Voltage (AC) 230 V, Nominal frequency 50/60 Hz Nominal power 1,1 kW, Rated current (AC) 4,5 A rotation max. 2800 min-1 Material motorshaft N-WE 14x30, stainless steel 1.4104 Protection class IP55 , Operating mode S1 With integrated frequency converter (500-3000 rpm) weight Ca. 11,5 kg
Max. Drehzahl 2800 rpm
Nennspannung 230 V
Werkstoff Impeller Perbunan® (NBR)
Werkstoff Dichtung Perbunan® (NBR)
Typ Dichtung Wellendichtring
Förderdruck 5 bar
Fördermenge 60 l/min

UNISTAR 2000-C, 2800 min-1, 230 V Impellerpump with motor, cable and plug, L/R runni

Art. Nr. 11311116351
Impellerpump Unistar 2000-C flow rate max. litres 90 l/min flow rate max. m³ 5,4 m³/h max. pressure 5 bar Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 1,1 kW, Rated current (AC) 7,1 A Starting capacitor 100 µF Operating capacitor 25 µF rotation max. 2800 min-1 Material motorshaft 1.4104 Protection class IP55 Motor protection (thermal) 150 Rotation direction left/right weight 13 kg
Max. Drehzahl 2800 rpm
Werkstoff Dichtung Perbunan® (NBR)
Werkstoff Impeller Perbunan® (NBR)
Typ Dichtung Wellendichtring
Förderdruck 5 bar
Nennspannung 230 V
Fördermenge 90 l/min

UNISTAR 2000-C, 2800 min-1, 230/400 V Impellerpump with motor, cable and plug, L/R runni

UNISTAR 2000-C, 2800 min-1, 230/400 V
Art. Nr. 11311117351
Impellerpump Unistar 2000-C flow rate max. litres 90 l/min flow rate max. m³ 5,4 m³/h max. pressure 5 bar Inlet/outlet 1¼ mt Impeller Perbunan® (NBR) , Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230/400 V, Nominal frequency 50 Hz Nominal power 1,1 kW, Rated current (AC) 4,7/2,7 A rotation max. 2800 min-1 Motorshaft S-WE 14x89mm Rotation direction left/right Protection class IP55 , Operating mode S1 weight 13 kg
Max. Drehzahl 2800 rpm
Werkstoff Impeller Perbunan® (NBR)
Werkstoff Dichtung Perbunan® (NBR)
Typ Dichtung Wellendichtring
Förderdruck 5 bar
Nennspannung 230/400 V
Fördermenge 90 l/min

UNISTAR/E 2000-A, GLRD 2800 min-1, 230 V Impellerpump with motor, cable and plug

UNISTAR/E 2000-A, GLRD 2800 min-1, 230 V
Art. Nr. 11128256321
Impellerpumpe flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 5 bar Inlet/outlet ¾" mt Impeller EPDM Bush material stainless steel (1.4404) Mechanical seal Carbon/Keramik/FKM Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 3,2 A Starting capacitor 40 µF Operating capacitor 20 µF rotation max. 2800 min-1 Protection class IP55, Operating mode S1 Material motorshaft 1.4104 weight 9,4 kg Bush material stainless steel (1.4404)
Max. Drehzahl 2800 rpm
Nennspannung 230 V
Förderdruck 5 bar
Werkstoff Dichtung EPDM
Typ Dichtung O-Ring
Werkstoff Impeller EPDM
Fördermenge 30 l/min

UNISTAR/E 2000-B, GLRD, 2800 min-1, 230/400 V Impellerpump with motor, cable and plug

UNISTAR/E 2000-B, GLRD, 2800 min-1, 230/400 V
Art. Nr. 11228227331
Impellerpump flow rate max. litres 60 l/min flow rate max. m³ 3,6 m³/h max. pressure 3 bar Inlet/outlet 1" mt Impeller EPDM , Bush material stainless steel (1.4404) Mechanical seal Car/Cer/EPDM Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230/400 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 2,4/1,4 A rotation max. 2800 min-1 Material motorshaft 1.4104 Protection class IP55 , Operating mode S1
Fördermenge 60 l/min
Nennspannung 230/400 V
Max. Drehzahl 2800 rpm
Werkstoff Dichtung EPDM
Typ Dichtung O-Ring
Förderdruck 3 bar
Werkstoff Impeller EPDM

UNISTAR/K 2000-A, 1400 min-1, 230 V Impellerpump with motor, cable and plug

UNISTAR/K 2000-A, 1400 min-1, 230 V
Art. Nr. 11191116322
Impellerpump flow rate max. litres 15 l/min flow rate max. m³ 0,9 m³/h max. pressure 4 bar Inlet/outlet ¾" mt Impeller thermoplastic (no bi-directional use) , Bush material polyamide bush Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 3,2 A Starting capacitor 40 µF Operating capacitor 16 µF rotation max. 1400 min-1 Material motorshaft 1.4104 Protection class IP55, Operating mode S1 weight 9,4 kg
Typ Dichtung Wellendichtring
Förderdruck 4 bar
Nennspannung 230 V
Fördermenge 15 l/min
Max. Drehzahl 1400 rpm
Werkstoff Impeller TPU (nicht f.L-/R-Lauf!)
Werkstoff Dichtung Perbunan® (NBR)

UNISTAR/K 2000-A, 1400 min-1, 230/400 V Impellerpump with motor, cable and plug

UNISTAR/K 2000-A, 1400 min-1, 230/400 V
Art. Nr. 11191117322
Impellerpump flow rate max. litres 15 l/min flow rate max. m³ 0,9 m³/h max. pressure 4 bar Inlet/outlet ¾" mt Impeller thermoplastic (no bi-directional use) , Bush material polyamide bush Shaft sealing ring Perbunan® (NBR) Temperature max. 60 °C Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230/400 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 2/1,15 A rotation max. 1400 min-1 Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 weight 9,4 kg
Nennspannung 230/400 V
Förderdruck 4 bar
Werkstoff Impeller TPU (nicht f.L-/R-Lauf!)
Max. Drehzahl 1400 rpm
Werkstoff Dichtung Perbunan® (NBR)
Fördermenge 15 l/min
Typ Dichtung Wellendichtring

UNISTAR/K 2000-A, 2800 min-1, 230 V Impellerpump with motor, cable and plug

UNISTAR/K 2000-A, 2800 min-1, 230 V
Art. Nr. 11191116321
Impellerpump flow rate max. m³ 1,8 m³/h flow rate max. litres 30 l/min max. pressure 4 bar Inlet/outlet ¾" mt Impeller thermoplastic (no bi-directional use) , Bush material polyamide bush Temperature max. 60 °C Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 3,2 A Starting capacitor 40 µF Operating capacitor 20 µF rotation max. 2800 min-1 Material motorshaft 1.4104 Protection class IP55 Motor protection (thermal) 130 weight 9,4 kg
Max. Drehzahl 2800 rpm
Nennspannung 230 V
Werkstoff Impeller TPU (nicht f.L-/R-Lauf!)
Fördermenge 30 l/min
Werkstoff Dichtung Perbunan® (NBR)
Förderdruck 4 bar
Typ Dichtung Wellendichtring

UNISTAR/K 2000-A, 2800 min-1, 230/400 V Impellerpump with motor, cable and plug

UNISTAR/K 2000-A, 2800 min-1, 230/400 V
Art. Nr. 11191117321
Impellerpump flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 5 bar Inlet/outlet ¾" mt Impeller thermoplastic (no bi-directional use) , Bush material polyamide bush Shaft sealing ring Perbunan® (NBR) Temperature max. 60 °C Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230/400 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 1,9/1,1 A Material motorshaft 1.4404 Protection class IP55 , Operating mode S1 weight 9,4 kg
Förderdruck 5 bar
Nennspannung 230/400 V
Max. Drehzahl 2800 rpm
Fördermenge 30 l/min
Werkstoff Impeller TPU (nicht f.L-/R-Lauf!)
Werkstoff Dichtung Perbunan® (NBR)
Typ Dichtung Wellendichtring

UNISTAR/K 2000-A, GLRD, 1400 min-1, 230 V Impellerpump with motor, cable and plug

UNISTAR/K 2000-A, GLRD, 1400 min-1, 230 V
Art. Nr. 11191256322
Impellerpump flow rate max. litres 15 l/min flow rate max. m³ 0,9 m³/h max. pressure 4 bar Inlet/outlet ¾" mt Impeller thermoplastic (no bi-directional use) , Bush material polyamide bush Mechanical seal Carbon/Keramik/FKM Temperature max. 60 °C Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 3,2 A Starting capacitor 40 µF Operating capacitor 16 µF rotation max. 1400 min-1 Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 Motor protection (thermal) 130 weight 9,4 kg
Förderdruck 4 bar
Fördermenge 15 l/min
Werkstoff Dichtung Perbunan® (NBR)
Werkstoff Impeller TPU (nicht f.L-/R-Lauf!)
Nennspannung 230 V
Max. Drehzahl 1400 rpm
Typ Dichtung Gleitringdichtung

UNISTAR/K 2000-A/PT, 3000 min-1, 12 V Impellerpump with DC motor Creusen

Art. Nr. 11191111411
Impellerpump flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 5 bar Inlet/outlet ¾" mt Impeller thermoplastic (no bi-directional use) , Bush material polyamide bush Shaft sealing ring Perbunan® (NBR) Temperature max. 60 °C Material pump housing aluminum EN AW-6082/AC-43400 With pump carrier Electric motor Voltage (DC) 12 V Nominal power 0,25 kW, Rated current (DC) 42 A rotation max. 3000 min-1 Motorshaft N-WE 14x30 Protection class IP54 , Operating mode S1 Electrical connection Control board weight 9,2 kg
Werkstoff Impeller TPU (nicht f.L-/R-Lauf!)
Nennspannung 12 V
Max. Drehzahl 3000 rpm
Typ Dichtung Wellendichtring
Förderdruck 5 bar
Werkstoff Dichtung Perbunan® (NBR)
Fördermenge 30 l/min

UNISTAR/K 2000-A/PT, 3000 min-1, 24 V Impellerpump with DC motor CEM

UNISTAR/K 2000-A/PT, 3000 min-1, 24 V
Art. Nr. 11191112411
Impellerpump flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 5 bar Inlet/outlet ¾" mt Impeller thermoplastic (no bi-directional use) , Bush material polyamide bush Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 With pump carrier Electric motor CEM Voltage (DC) 24 V Nominal power 0,25 kW, Rated current (DC) 16 A rotation max. 3000 min-1 Motorshaft N-WE 14x30mm Protection class IP54 , Operating mode S1 Electrical connection Control board Without cable and plug Colour RAL 9005 black
Max. Drehzahl 3000 rpm
Werkstoff Impeller TPU (nicht f.L-/R-Lauf!)
Werkstoff Dichtung Perbunan® (NBR)
Typ Dichtung Wellendichtring
Förderdruck 5 bar
Fördermenge 30 l/min
Nennspannung 24 V

UNISTAR/K 2000-B, 1400 min-1, 230 V Impellerpump with motor, cable and plug

UNISTAR/K 2000-B, 1400 min-1, 230 V
Art. Nr. 11291116332
Impellerpump flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 4 bar Inlet/outlet 1" mt Impeller thermoplastic (no bi-directional use) , Bush material polyamide bush Temperature max. 60 °C Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 3,8 A Starting capacitor 40 µF Operating capacitor 16 µF rotation max. 1400 min-1 Material motorshaft 1.4104 Protection class IP55 Motor protection (thermal) 130 weight 10 kg
Werkstoff Dichtung Perbunan® (NBR)
Förderdruck 4 bar
Fördermenge 30 l/min
Typ Dichtung Wellendichtring
Nennspannung 230 V
Max. Drehzahl 1400 rpm
Werkstoff Impeller TPU (nicht f.L-/R-Lauf!)

UNISTAR/K 2000-B, 2800 min-1, 230 V Impellerpump with motor, cable and plug

UNISTAR/K 2000-B, 2800 min-1, 230 V
Art. Nr. 11291116331
Impellerpump flow rate max. litres 60 l/min flow rate max. m³ 3,6 m³/h max. pressure 5 bar Inlet/outlet 1" mt Impeller thermoplastic (no bi-directional use) , Bush material polyamide bush Temperature max. 60 °C Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 4,3 A Starting capacitor 40 µF Operating capacitor 20 µF rotation max. 2800 min-1 Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 Motor protection (thermal) 130 weight 10 kg
Förderdruck 5 bar
Max. Drehzahl 2800 rpm
Werkstoff Impeller TPU (nicht f.L-/R-Lauf!)
Fördermenge 60 l/min
Werkstoff Dichtung Perbunan® (NBR)
Nennspannung 230 V
Typ Dichtung Wellendichtring

UNISTAR/K 2000-B, 2800 min-1, 230/400 V Impellerpump with motor, cable and plug

UNISTAR/K 2000-B, 2800 min-1, 230/400 V
Art. Nr. 11291117331
Impellerpump flow rate max. litres 60 l/min flow rate max. m³ 3,6 m³/h max. pressure 5 bar Inlet/outlet 1" mt Impeller thermoplastic (no bi-directional use) , Bush material polyamide bush Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230/400 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 2,4/1,4 A rotation max. 2800 min-1 Material motorshaft 1.4104 Protection class IP55 , Operating mode S1
Werkstoff Impeller TPU (nicht f.L-/R-Lauf!)
Werkstoff Dichtung Perbunan® (NBR)
Typ Dichtung Wellendichtring
Nennspannung 230/400 V
Förderdruck 5 bar
Fördermenge 60 l/min
Max. Drehzahl 2800 rpm

UNISTAR/K 2000-B, GLRD, 1400 min-1, 230 V Impellerpump with motor, cable and plug

UNISTAR/K 2000-B, GLRD, 1400 min-1, 230 V
Art. Nr. 11291256332
Impellerpump flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 4 bar Inlet/outlet 1" mt Impeller thermoplastic (no bi-directional use) , Bush material polyamide bush Mechanical seal Carbon/Keramik/FKM Temperature max. 60 °C Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 3,8 A Starting capacitor 40 µF Operating capacitor 16 µF rotation max. 1400 min-1 Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 Motor protection (thermal) 130 weight 10 kg
Werkstoff Dichtung Perbunan® (NBR)
Werkstoff Impeller TPU (nicht f.L-/R-Lauf!)
Förderdruck 4 bar
Nennspannung 230 V
Typ Dichtung Gleitringdichtung
Fördermenge 30 l/min
Max. Drehzahl 1400 rpm

UNISTAR/K 2000-C, 2800 min-1, 230 V Impellerpump with motor, cable and plug

UNISTAR/K 2000-C, 2800 min-1, 230 V
Art. Nr. 11391136341
Impellerpump flow rate max. litres 90 l/min flow rate max. m³ 5,4 m³/h max. pressure 5 bar Inlet/outlet 1 1/4" mt Impeller thermoplastic (no bi-directional use) , Bush material polyamide bush Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 1,1 kW, Rated current (AC) 7,1 A Starting capacitor 100 µF Operating capacitor 25 µF rotation max. 2800 min-1 Rotation direction left/right Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 Motor protection (thermal) 150 weight 13 kg
Nennspannung 230 V
Max. Drehzahl 2800 rpm
Werkstoff Dichtung Viton® (FKM)
Werkstoff Impeller TPU (nicht f.L-/R-Lauf!)
Fördermenge 90 l/min
Förderdruck 5 bar
Typ Dichtung Wellendichtring

UNISTAR/K 2000-C, 2800 min-1, 230/400 V Impellerpump with motor, cable and plug, L/R runni

Art. Nr. 11391137151
Impellerpump flow rate max. litres 90 l/min flow rate max. m³ 5,4 m³/h max. pressure 5 bar Inlet/outlet 1 1/4" mt Impeller thermoplastic (no bi-directional use) , Bush material polyamide bush Shaft sealing ring Viton® (FKM) Temperature max. 60 °C Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230/400 V, Nominal frequency 50 Hz Nominal power 1,1 kW, Rated current (AC) 4,7/2,7 A rotation max. 2800 min-1 Material motorshaft 1.4104 Rotation direction left/right Protection class IP55 , Operating mode S1 weight 13 kg
Förderdruck 5 bar
Fördermenge 90 l/min
Werkstoff Impeller TPU (nicht f.L-/R-Lauf!)
Nennspannung 230/400 V
Max. Drehzahl 2800 rpm
Werkstoff Dichtung Viton® (FKM)
Typ Dichtung Wellendichtring

UNISTAR/V 2000-A, 1400 min-1, 230 V Impellerpump with motor, cable and plug

UNISTAR/V 2000-A, 1400 min-1, 230 V
Art. Nr. 11131136322
Impellerpump flow rate max. litres 15 l/min flow rate max. m³ 0,9 m³/h max. pressure 3 bar Inlet/outlet ¾" mt Impeller Viton® (FKM) , Bush material Polyamid Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 3,2 A Starting capacitor 40 µF Operating capacitor 16 µF rotation max. 1400 min-1 Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 Motor protection (thermal) 130 weight 9,4 kg
Typ Dichtung Wellendichtring
Werkstoff Impeller Viton® (FKM)
Nennspannung 230 V
Max. Drehzahl 1400 rpm
Förderdruck 3 bar
Werkstoff Dichtung Viton® (FKM)
Fördermenge 15 l/min

UNISTAR/V 2000-A, 1400 min-1, 230 V Impellerpump with motor, cable and plug

UNISTAR/V 2000-A, 1400 min-1, 230 V
Art. Nr. 11138136322
Impellerpump flow rate max. litres 15 l/min flow rate max. m³ 0,9 m³/h max. pressure 3 bar Inlet/outlet ¾" mt Impeller Viton® (FKM) , Bush material stainless steel (1.4404) Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 3,2 A Starting capacitor 40 µF Operating capacitor 16 µF rotation max. 1400 min-1 Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 Motor protection (thermal) 130 weight 0,6 kg
Nennspannung 230 V
Max. Drehzahl 1400 rpm
Werkstoff Impeller Viton® (FKM)
Typ Dichtung Wellendichtring
Förderdruck 3 bar
Fördermenge 15 l/min
Werkstoff Dichtung Viton® (FKM)

UNISTAR/V 2000-A, 1400 min-1, 230/400 V Impellerpump with motor, cable and plug

UNISTAR/V 2000-A, 1400 min-1, 230/400 V
Art. Nr. 11138137322
Impellerpump flow rate max. litres 15 l/min flow rate max. m³ 0,9 m³/h max. pressure 3 bar Inlet/outlet ¾" mt Impeller Viton® (FKM) , Bush material stainless steel (1.4404) Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230/400 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 2/1,15 A rotation max. 1400 min-1 Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 weight 9,4 kg
Nennspannung 230/400 V
Max. Drehzahl 1400 rpm
Typ Dichtung Wellendichtring
Werkstoff Dichtung Viton® (FKM)
Werkstoff Impeller Viton® (FKM)
Förderdruck 3 bar
Fördermenge 15 l/min

UNISTAR/V 2000-A, 1400 min-1, 230/400 V Impellerpump with motor, cable and plug

UNISTAR/V 2000-A, 1400 min-1, 230/400 V
Art. Nr. 11131137322
Impellerpump flow rate max. litres 15 l/min flow rate max. m³ 0,9 m³/h max. pressure 3 bar Inlet/outlet ¾" mt Impeller Viton® (FKM) , Bush material Polyamid Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230/400 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 2/1,15 A rotation max. 1400 min-1 Motorshaft S-WE 14x37,5mm Protection class IP55 , Operating mode S1 weight 9,4 kg
Max. Drehzahl 1400 rpm
Werkstoff Impeller Viton® (FKM)
Typ Dichtung Wellendichtring
Werkstoff Dichtung Viton® (FKM)
Förderdruck 3 bar
Nennspannung 230/400 V
Fördermenge 15 l/min

UNISTAR/V 2000-A, 2800 min-1, 230 V Impellerpump with motor, cable and plug

UNISTAR/V 2000-A, 2800 min-1, 230 V
Art. Nr. 110121M
Impellerpump flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 3 bar Inlet/outlet ¾" mt Impeller Viton® (FKM) , Bush material Polyamid Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 3,2 A Starting capacitor 40 µF Operating capacitor 20 µF rotation max. 2800 min-1 Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 Motor protection (thermal) 130 weight 9,4 kg
Nennspannung 230 V
Werkstoff Dichtung Viton® (FKM)
Max. Drehzahl 2800 rpm
Typ Dichtung Wellendichtring
Fördermenge 30 l/min
Förderdruck 3 bar
Werkstoff Impeller Viton® (FKM)

UNISTAR/V 2000-A, 2800 min-1, 230/400 V Impellerpump with motor, cable and plug

UNISTAR/V 2000-A, 2800 min-1, 230/400 V
Art. Nr. 11138137321
Impellerpump flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 3 bar Inlet/outlet ¾" mt Impeller Viton® (FKM) , Bush material stainless steel (1.4404) Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230/400 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 1,9/1,1 A rotation max. 2800 min-1 Material motorshaft 1.4404 Protection class IP55 , Operating mode S1 weight 9,4 kg
Typ Dichtung Wellendichtring
Max. Drehzahl 2800 rpm
Nennspannung 230/400 V
Werkstoff Dichtung Viton® (FKM)
Werkstoff Impeller Viton® (FKM)
Förderdruck 3 bar
Fördermenge 30 l/min

UNISTAR/V 2000-A, 2800 min-1, 230/400 V Impellerpump with motor, cable and plug

UNISTAR/V 2000-A, 2800 min-1, 230/400 V
Art. Nr. 11131137321
Impellerpump flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 3 bar Inlet/outlet ¾" mt Impeller Viton® (FKM) , Bush material Polyamid Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230/400 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 1,9/1,1 A rotation max. 2800 min-1 Material motorshaft 1.4404 Protection class IP55 , Operating mode S1 weight 9,4 kg
Max. Drehzahl 2800 rpm
Werkstoff Impeller Viton® (FKM)
Werkstoff Dichtung Viton® (FKM)
Förderdruck 3 bar
Typ Dichtung Wellendichtring
Fördermenge 30 l/min
Nennspannung 230/400 V

UNISTAR/V 2000-A, GLRD, 1400 min-1, 230/400 V Impellerpump with motor, cable and plug

UNISTAR/V 2000-A, GLRD, 1400 min-1, 230/400 V
Art. Nr. 11131257322
Impellerpump flow rate max. litres 15 l/min flow rate max. m³ 0,9 m³/h max. pressure 3 bar Inlet/outlet ¾" mt Impeller Viton® (FKM) , Bush material Polyamid Mechanical seal Carbon/Keramik/FKM Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230/400 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 2/1,15 A rotation max. 1400 min-1 Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 weight 9,4 kg
Förderdruck 3 bar
Fördermenge 15 l/min
Nennspannung 230/400 V
Max. Drehzahl 1400 rpm
Werkstoff Dichtung Viton® (FKM)
Werkstoff Impeller Viton® (FKM)
Typ Dichtung Gleitringdichtung

UNISTAR/V 2000-A/PT, 1500 min-1, 24 V Impellerpump with DC motor CEM

Art. Nr. 11131132412
Impellerpump flow rate max. litres 15 l/min flow rate max. m³ 0,9 m³/h max. pressure 3 bar Inlet/outlet ¾" mt Impeller Viton® (FKM) , Bush material Polyamid Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 With pump carrier Electric motor CEM Voltage (DC) 24 V Nominal power 0,25 kW, Rated current (DC) 16 A rotation max. 1500 min-1 Motorshaft N-WE 14x30mm Protection class IP55 , Operating mode S1 Electrical connection Control board Colour RAL 9005 black weight 9,2 kg
Nennspannung 24 V
Max. Drehzahl 1500 rpm
Werkstoff Impeller Viton® (FKM)
Werkstoff Dichtung Viton® (FKM)
Förderdruck 3 bar
Typ Dichtung Wellendichtring
Fördermenge 15 l/min

UNISTAR/V 2000-A/PT, 3000 min-1, 12 V Impellerpump with DC motor Creusen

Art. Nr. 11138131411
Impellerpump flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 3 bar Inlet/outlet ¾" mt Impeller Viton® (FKM) , Bush material stainless steel (1.4404) Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 With pump carrier Electric motor Voltage (DC) 12 V Nominal power 0,25 kW, Rated current (DC) 42 A rotation max. 3000 min-1 Motorshaft N-WE 14x30 Protection class IP54 , Operating mode S1 Electrical connection Control board weight 9,2 kg
Werkstoff Dichtung Viton® (FKM)
Typ Dichtung Wellendichtring
Förderdruck 3 bar
Nennspannung 12 V
Max. Drehzahl 3000 rpm
Werkstoff Impeller Viton® (FKM)
Fördermenge 30 l/min

UNISTAR/V 2000-A/PT, 3000 min-1, 12 V Impellerpump with DC motor Creusen

Art. Nr. 11131131411
Impellerpump flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 3 bar Inlet/outlet ¾" mt Impeller Viton® (FKM) , Bush material Polyamid Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 With pump carrier Electric motor Voltage (DC) 12 V Nominal power 0,25 kW, Rated current (DC) 42 A rotation max. 3000 min-1 Motorshaft N-WE 14x30 Protection class IP54 , Operating mode S1 Electrical connection Control board weight 9,2 kg
Nennspannung 12 V
Werkstoff Impeller Viton® (FKM)
Max. Drehzahl 3000 rpm
Werkstoff Dichtung Viton® (FKM)
Typ Dichtung Wellendichtring
Förderdruck 3 bar
Fördermenge 30 l/min

UNISTAR/V 2000-A/PT, 3000 min-1, 24 V Impellerpump with DC motor type CEM

UNISTAR/V 2000-A/PT, 3000 min-1, 24 V
Art. Nr. 11131132411
Impellerpump flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 3 bar Inlet/outlet ¾" mt Impeller Viton® (FKM) , Bush material Polyamid Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 With pump carrier Electric motor CEM Voltage (DC) 24 V Nominal power 0,25 kW, Rated current (DC) 16 A rotation max. 3000 min-1 Motorshaft N-WE 14x30mm Protection class IP54 , Operating mode S1 Electrical connection Control board weight 9,2 kg
Werkstoff Impeller Viton® (FKM)
Typ Dichtung Wellendichtring
Max. Drehzahl 3000 rpm
Werkstoff Dichtung Viton® (FKM)
Förderdruck 3 bar
Nennspannung 24 V
Fördermenge 30 l/min

UNISTAR/V 2000-B, 1400 min-1, 230 V Impellerpump with motor, cable and plug

UNISTAR/V 2000-B, 1400 min-1, 230 V
Art. Nr. 11238136332
Impellerpump flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 3 bar Inlet/outlet 1" mt Impeller Viton® (FKM) , Bush material stainless steel (1.4404) Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 3,8 A Starting capacitor 40 µF Operating capacitor 16 µF rotation max. 1400 min-1 Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 Motor protection (thermal) 130 weight 9,6 kg
Nennspannung 230 V
Max. Drehzahl 1400 rpm
Werkstoff Impeller Viton® (FKM)
Typ Dichtung Wellendichtring
Werkstoff Dichtung Viton® (FKM)
Förderdruck 3 bar
Fördermenge 30 l/min

UNISTAR/V 2000-B, 1400 min-1, 230 V Impellerpump with motor, cable and plug

UNISTAR/V 2000-B, 1400 min-1, 230 V
Art. Nr. 11231136332
Impellerpump flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 3 bar Inlet/outlet 1" mt Impeller Viton® (FKM) , Bush material Polyamid Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 3,8 A Starting capacitor 40 µF Operating capacitor 16 µF rotation max. 1400 min-1 Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 Motor protection (thermal) 130 weight 10,0 kg
Nennspannung 230 V
Werkstoff Impeller Viton® (FKM)
Max. Drehzahl 1400 rpm
Förderdruck 3 bar
Werkstoff Dichtung Viton® (FKM)
Fördermenge 30 l/min
Typ Dichtung Wellendichtring

UNISTAR/V 2000-B, 1400 min-1, 230/400 V Impellerpump with motor, cable and plug

UNISTAR/V 2000-B, 1400 min-1, 230/400 V
Art. Nr. 11231137332
Impellerpump flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 3 bar Inlet/outlet 1" mt Impeller Viton® (FKM) , Bush material Polyamid Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230/400 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 2/1,6 A rotation max. 1400 min-1 Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 weight 9,6 kg
Nennspannung 230/400 V
Max. Drehzahl 1400 rpm
Förderdruck 3 bar
Werkstoff Impeller Viton® (FKM)
Werkstoff Dichtung Viton® (FKM)
Typ Dichtung Wellendichtring
Fördermenge 30 l/min

UNISTAR/V 2000-B, 1400 min-1, 230/400 V Impellerpump with motor, cable and plug

UNISTAR/V 2000-B, 1400 min-1, 230/400 V
Art. Nr. 11238137332
Impellerpump flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 3 bar Inlet/outlet 1" mt Impeller Viton® (FKM) , Bush material stainless steel (1.4404) Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230/400 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 2/1,6 A rotation max. 1400 min-1 Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 weight 10 kg
Max. Drehzahl 1400 rpm
Werkstoff Dichtung Viton® (FKM)
Nennspannung 230/400 V
Typ Dichtung Wellendichtring
Werkstoff Impeller Viton® (FKM)
Förderdruck 3 bar
Fördermenge 30 l/min

UNISTAR/V 2000-B, 2800 min-1, 230 V Impellerpump with motor, cable and plug

UNISTAR/V 2000-B, 2800 min-1, 230 V
Art. Nr. 110131M
Impellerpump flow rate max. litres 60 l/min flow rate max. m³ 3,6 m³/h max. pressure 3 bar Inlet/outlet 1" mt Impeller Viton® (FKM) , Bush material Polyamid Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 4,3 A Starting capacitor 40 µF Operating capacitor 20 µF rotation max. 2800 min-1 Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 Motor protection (thermal) 130 weight 10 kg
Nennspannung 230 V
Max. Drehzahl 2800 rpm
Werkstoff Impeller Viton® (FKM)
Werkstoff Dichtung Viton® (FKM)
Typ Dichtung Wellendichtring
Fördermenge 60 l/min
Förderdruck 3 bar

UNISTAR/V 2000-B, 2800 min-1, 230/400 V Impellerpump with motor, cable and plug

UNISTAR/V 2000-B, 2800 min-1, 230/400 V
Art. Nr. 11231137331
Impellerpump flow rate max. litres 60 l/min flow rate max. m³ 3,6 m³/h max. pressure 3 bar Inlet/outlet 1" mt Impeller Viton® (FKM) , Bush material Polyamid Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230/400 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 2,4/1,4 A rotation max. 2800 min-1 Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 weight 9,6 kg
Typ Dichtung Wellendichtring
Nennspannung 230/400 V
Max. Drehzahl 2800 rpm
Werkstoff Dichtung Viton® (FKM)
Werkstoff Impeller Viton® (FKM)
Förderdruck 3 bar
Fördermenge 60 l/min

UNISTAR/V 2000-B, 980/1700 min-1, 12/24 V Impellerpump with DC motor Power Tronic

Art. Nr. 11231131312
Impellerpump flow rate max. litres 16/32 l/min flow rate max. m³ 0,96/1,92 m³/h max. pressure 3 bar Inlet/outlet 1" mt Impeller Viton® (FKM) , Bush material Polyamid Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Power Tronic Voltage (DC) 12/24 V Nominal power 0,35/0,45 kW Rated current (DC) starting current 17/20, operating current 12/15 A rotation max. 980/1700 min-1 Motorshaft S-WE 14x58,5 Protection class IP44 , Operating mode S1 5 m cable with plug, On/OFF-switch weight 3,1 kg
Werkstoff Dichtung Viton® (FKM)
Nennspannung 12/24 V
Max. Drehzahl 980/1700 rpm
Förderdruck 3 bar
Fördermenge 16/32 l/min
Werkstoff Impeller Viton® (FKM)
Typ Dichtung Wellendichtring

UNISTAR/V 2000-B/PT, 3000 min-1, 12 V Impellerpump with DC motor Creusen

Art. Nr. 11238131421
Impellerpump flow rate max. litres 60 l/min flow rate max. m³ 3,6 m³/h max. pressure 3 bar Inlet/outlet 1" mt Impeller Viton® (FKM) , Bush material stainless steel (1.4404) Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 With pump carrier Electric motor Voltage (DC) 12 V Nominal power 0,37 kW, Rated current (DC) 49 A rotation max. 3000 min-1 Motorshaft N-WE 14x30 Protection class IP54 , Operating mode S1 Electrical connection Control board weight 9,4 kg
Förderdruck 3 bar
Nennspannung 12 V
Werkstoff Dichtung Viton® (FKM)
Max. Drehzahl 3000 rpm
Typ Dichtung Wellendichtring
Fördermenge 60 l/min
Werkstoff Impeller Viton® (FKM)

UNISTAR/V 2000-B/PT, 3000 min-1, 24 V Impellerpump with DC motor Creusen

Art. Nr. 11238132421
Impellerpump flow rate max. litres 60 l/min flow rate max. m³ 3,6 m³/h max. pressure 3 bar Inlet/outlet 1" mt Impeller Viton® (FKM) , Bush material stainless steel (1.4404) Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 With pump carrier Electric motor Voltage (DC) 24 V Nominal power 0,37 kW, Rated current (DC) 23 A rotation max. 3000 min-1 Motorshaft N-WE 14x30 Protection class IP54 , Operating mode S1 Electrical connection Control board weight 9,4 kg
Max. Drehzahl 3000 rpm
Förderdruck 3 bar
Fördermenge 60 l/min
Typ Dichtung Wellendichtring
Nennspannung 24 V
Werkstoff Dichtung Viton® (FKM)
Werkstoff Impeller Viton® (FKM)

UNISTAR/V 2000-C, 2800 min-1, 230 V Impellerpump with motor, cable and plug, bi-direct

UNISTAR/V 2000-C, 2800 min-1, 230 V
Art. Nr. 11331136341
Impellerpump flow rate max. litres 90 l/min flow rate max. m³ 5,4 m³/h max. pressure 3 bar Inlet/outlet 1 ¼“ mt Impeller Viton® (FKM) , Bush material Polyamid Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 1,1 kW, Rated current (AC) 7,1 A Starting capacitor 100 µF Operating capacitor 25 µF rotation max. 2800 min-1 Material motorshaft 1.4104 Rotation direction left/right Protection class IP55 , Operating mode S1 Motor protection (thermal) 150 weight 13 kg
Fördermenge 90 l/min
Nennspannung 230 V
Max. Drehzahl 2800 rpm
Werkstoff Dichtung Viton® (FKM)
Typ Dichtung Wellendichtring
Werkstoff Impeller Viton® (FKM)
Förderdruck 3 bar

UNISTAR/V 2000-C, 2800 min-1, 230/400 V Impellerpump with motor, cable and plug, bi-direct

UNISTAR/V 2000-C, 2800 min-1, 230/400 V
Art. Nr. 11331137141
.Impellerpump flow rate max. litres 90 l/min flow rate max. m³ 5,4 m³/h max. pressure 3 bar Inlet/outlet 1 ¼“ mt Impeller Viton® (FKM) , Bush material stainless steel (1.4404) Shaft sealing ring Viton® (FKM) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230/400 V, Nominal frequency 50 Hz Nominal power 1,1 kW, Rated current (AC) 4,7/2,7 A rotation max. 2800 min-1 Material motorshaft 1.4104 Rotation direction left/right Protection class IP55 , Operating mode S1 weight 13 kg
Nennspannung 230/400 V
Max. Drehzahl 2800 rpm
Werkstoff Dichtung Viton® (FKM)
Förderdruck 3 bar
Fördermenge 90 l/min
Typ Dichtung Wellendichtring
Werkstoff Impeller Viton® (FKM)