HPAC alternative energies > Solar filling pumps
| Pumps | HPAC alternative energies | Plant Protection | Accessories |
Pumps for filling and flushing solar loops |
|||
; "Zoom") |
; "Zoom")
|
| Solar filling pump UNISTAR | Solar filling pump P80 |
Flushing, venting and filling heat transfer medium into solar loops in just one procedure
- efficient pumps for filling solar systems quickly and accurately with heat transfer fluid
- fine filter in the suction line to filter out solder and weld residues
- drain valve at the pump outlet to reduce pressure in the flling hose after use (only for UNISTAR 2000-A)
Technical specifications:
| Type | UNISTAR 2000-A | P80 |
|---|---|---|
| Pump |
dry self-priming impeller pump to solids and air in the fluid |
self-priming centrifugal pump (max. dry run 1 min) |
| Impeller | Perbunan (NBR) | -- |
| Housing/Cover | Al Mg Si 1 | gray cast iron |
| Hoses | temperature resistant up to 170°C | temperature resistant up to 60°C |
| Flow rate max. | 30 L/min | 31 L/min |
| Pressure max. | 5 bar | 5,9 bar |
| Motor | 230 Volt with thermal motor protection On/Off switch, 2 m cable with plug |
230 Volt 1,7 m cable with plug |
| Motor power | 0,37 kW | 0,59 kW |
top of page
