Pumps > Impeller pumps > PROFISTAR 2001
| Pumps | HPAC alternative energies | Plant Protection | Accessories |
PROFISTAR 2001 without drive |
|||
HART-COAT® is an electrolytical treatment of aluminium materials
by an external source of current that produces a protective aluminium
oxide coating. Thus economic aluminium material with HART-COAT® can
be substituted for expensive corrosion resistant steel.
Benefits of HC coating:
- more surface hardness and abrasion resistance
- improved gliding qualities, pump starts working more easily
- excellent corrosion resistance against acid liquids up to pH 2
Applications:
- water, also contaminated water and sea water
- diesel, biodiesel
- oils: heating oil, engine oil, hydraulic oil, vegetable oil
- herbicides, insecticides
- detergents
- antifreeze
- heat transfer fluid
Technical specifications:
| UNISTAR | 2001-A | 2001-B |
|---|---|---|
| Flow rate max. | 30 litre/min. | 60 litre/min |
| Suction head max. | 7 m (dry up to 3m) | |
| Pressure max. | 4 bar | |
| Housing | Al Mg Si 1 | |
| Cover | Al Mg Si 1 | |
| Shaft | Niro 1.4104 | |
| Impeller * | Perbunan (NBR) | |
| Seal* | Perbunan (NBR) | |
| Temperature of pumped liquid | up to max. 60°C | |
| Connection inlet/outlet | 3/4" external screw thread | 1" external screw thread |
Possible drives:
Drilling machine(foto)
V-belt pulley (foto)
Hydraulic motor
Electric motor with integrated frequency converter
Pneumatic drive
* Note: The standard version includes impeller and seals specified above.
Upon request and depending on application different seals and impellers
(Neoprene, Viton™, EPDM™) are available.
Viton is a registered trademark of DuPont Dow Elastomers
top of page
;){kind=link}
;){kind=link}