HPAC alternative energies > Flush Pro
| Pumps | HPAC alternative energies | Plant protection | Accessories |
Flush PRO |
|||
; "Zoom") |
; "Bild vergrößern") |
; "Zoom") |
; "Zoom") |
| Flush Pro Standard | Flush Pro 90 | extension module 1 | extension module 2 |
Flush Pro Standard and Flush Pro 90: filling solar collectors, ground collectors and ground probes quickly and free of air enclosures with heat transfer medium
- high efficient impeller pump for quick and accurate filling of solar systems with heat transfer medium
- unit mounted on a sturdy and highly manoeuvrable cart
- practical hose and cord holder
- well fitting interlocking connector for the hose ends prevents leakage
of the liquid residue during the transport
- blocking valve at the tank outlet
- fine filter at the pump inlet filtering out solder- and weld residues
- tank can be removed for cleaning and has a wide opening with screw cap
- drain valve on pressure side to reduce pressure in the filling hose after use
top of page
Extension module 1: fill and flush system for heating water
(only for Flush Pro Standard)
Plate mounted and simple fixing onto the hose bracket.
Features:
- digital flow meter to control the filling volume
- fine filter 20 µm
- stainless steel plate
- pressure reducer
- connection for water softening equipment
- 2 multifunctional spigots
- connection for compressed air with electromagnetic timer valve
Extension module 2: Mixing containers for lime
(for Flush Pro Standard and Flush Pro 90)
Mixing large quantities of heat transfer medium conveniently onsite.
The multifunctional spigots on the basic module can be set in a way that
the medium circulates between pump and containers to achieve a perfect
mixture.
Features:
- 2 containers 150 litres with stop valves
- 6 metres suction hose 3/4"
- hose fork
top of page
| Technical Details Pumps | |
| Pump | dry self-priming impeller pump (max. dry run 1 min.) |
| Impeller | Perbunan (replaceable) |
| Housing/Cover | Al Mg Si 1 |
| Hoses | 2 x 3 m transparent, temperature resistant up to 60° C |
| Max. flow rate | 60 L/min (Flush Pro Standard) | 90 L/min (Flush Pro 90) |
| Max. pressure | 5 bar |
| Motor | 230 V with thermal motor protection, on/off switch, 2 m cable with plug |
| Power | 0,55 kW |
top of page
| Technical Details Cart | ||
|
Flush Pro Standard
|
Flush Pro 90
|
|
| Material | welded robust chassis | |
| Dimensions (H x W x D) without hoses | 985 x 495 x 555 mm | 1050 x 600 x 470 mm |
| Tank capacity | 30 litres | 50 litres |
| Tank | UV-stabilised PE tank with large lock-up opening and blocking valve at the outlet | |
top of page
