VISCOMAT - Barrel pump
VISCOMAT
Viscotroll - The mobile Oil Dispenser

Viscotroll is the ideal solution for delivering oil from a drum anywhere in the workshop. Powered by electricity it can be connected to any power socket thus eliminating the need for compressed air.

Viscotroll 70

  • Viscotroll 70
  • Viscotroll is the ideal solution for delivering oil from a drum anywhere in the workshop. ZUWA.
    Viscotroll 200
Filtroll - Filter unit on wheels with oil or diesel pump
Filter unit on wheels with oil and diesel pump. ZUWA.
Filtroll
MobilFil und Depuroil - Oil filtration and decanting device

The mobile oil filtratin device is the ideal equipment to remove suspended particles from the oil.

Mobile filter and handling device

  • Depuroil
  • MobilFil

Stationary ServiceCenter - Plate-mounted unit with pump

Stationary ServiceCenter for wall or tank attachment. The plate mounted unit is ideal for changing motor oils in large machines and plants and to be employed with a diversity of fluids as well.

The pump is equipped with two suction and two pressure hoses. These hoses are connected to the motor of the CHP unit, to a used oil tank and to a tank with new motor oil. The set up remains the same no matter if used oil is removed or fresh oil is delivered. Turning the multifunctional valves the four pipes are opened or closed accordingly.
Stationary Servicecenter

Function

The pump is equipped with two suction and two pressure hoses. These hoses are connected to the motor of the CHP unit, to a used oil tank and to a tank with new motor oil. The set up remains the same no matter if used oil is removed or fresh oil is delivered. Turning the multifunctional valves the four pipes are opened or closed accordingly.

Additional cleaning effect

Unlike removing motor oil through the oil drain plug, pumping out oil leads to an increased removal of sedimentation inside the motor. The higher flow rate creates a suction effect and extracts dirt. The pumps handles solids without being affected by it.

Mobile ServiceCenter - Pump mounted on frame

Mobile unit to extract and decant clean or stained oils of all kinds. Easy and safe operation: no handling of heavy tanks, no spilling of fluids.

  • Waste oil or any other fluid is pumped into the tank of the ServiceCenter. For disposal the unit can be moved conveniently to a collection point. Vice versa the ServiceCenter can be used for the transport of fluid to where it is needed and for pumping the fluid into a motor or vehicle.
    Servicecenter mobil
  • Servicecenter Mobilcenter KOMPAKT
    Servicecenter Mobilcenter KOMPAKT

Function

Apart from external suction and pressure pipes the pump has two lines to the container. With the two multifunctional valves A and B pump operation can be adjusted to either filling or draining the container.

Waste oil or any other fluid is pumped into the tank of the ServiceCenter. For disposal the unit can be moved conveniently to a collection point. Vice versa the ServiceCenter can be used for the transport of fluid to where it is needed and for pumping the fluid into a motor or vehicle.

Barrel Pump VISCOMAT 200 with flow meter K400

VISCOMAT
Art. Nr. 120648FZ
- VISCOMAT 200 - Pumo flow rate: max. 9 Liter per minute, - max. 12 Bar, electrical connection: 230 V; 550 W; xx A - suction tube 1" - barrel connection with stop valve and strainer - flow meter K400 - nozzle for oil, drip prevention valve - holder for nozzle - 4 meter filling hose 1/"", connection 1"
Flow rate 9 l/min
Nominal voltage 230 V

Barrel pump VISCOMAT 200 without flow meter

VISCOMAT
Art. Nr. 120648F
- VISCOMAT 200 - Pumo flow rate: max. 9 Liter per minute, - max. 12 Bar, electrical connection: 230 V; 550 W; xx A - suction tube 1" - barrel connection with stop valve and strainer - nozzle for oil, drip prevention valve - holder for nozzle - 4 meter filling hose 1/"", connection 1"
Nominal voltage 230 V
Flow rate 9 l/min

Barrel pump VISCOMAT 70 with flow meter K33

VISCOMAT
Art. Nr. 120644FZ
- VISCOMAT 70 - Pump flow rate: max. 25 Liter oer minute, - max. 6 bar, electrical connection 230 V; 750 W; xx A - suction tube 1" - barrel connection with stop valve and strainer - flow meter K33 - mechanical nozzle - holder for nozzle - 4 meter filling hose ¾", connection 1"
Nominal voltage 230 V
Flow rate 25 l/min

Barrel pump VISCOMAT 70 without flow meter

VISCOMAT
Art. Nr. 120644F
- VISCOMAT 70 - Pump flow rate: max. 25 Liter oer minute, - max. 6 bar, electrical connection 230 V; 750 W; 5,5 A - suction tube 1" - barrel connection with stop valve and strainer - mechanical nozzle - holder for nozzle - 4 meter filling hose ¾", connection 1"
Flow rate 25 l/min
Nominal voltage 230 V

CHP Oil Chaning Unit, stationary, on plate Impellerpump UNISTAR/V 2000-B , 1400 min-1, 230 V

CHP Oil Chaning Unit, stationary, on plate
Art. Nr. 11231136332-BHKW
Impellerpump flow rate max. litres (based on motor oil 10W40 at 20°C) 18 l/min flow rate max. m³ 1,08 m³/h max. pressure 3 bar Inlet/outlet 1" ft Impeller Viton® (FKM) , Bush material Polyamid Shaft sealing ring Viton® (FKM) Material pump housing Aluminium AIMgSi1 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 3,8 A rotation max. 1400 min-1, Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 Motor protection (thermal) 130 Equipment/Accessories : - 2 Multifunktionshähne - Manual nozzle type 120 with digital flow meter K400 - Oil resistant Suction hoses: 1 x 1,5 m, 1" (NW 25), with drum adapter and foot valve 1 x 3m, ¾" (NW 19) 1 x 3m, 1" (NW 25) - Oil resistant discharge hoses: 1 x 4m, ½" (NW 13) 1 x 4m, ¾" (NW 19) weight Ca. 25 kg
Flow rate (auf Basis Motoröl 10W40 bei 20°C) 18 l/min
Nominal voltage 230 V

Depuroil, 230V with Viscomat 90

Depuroil
Art. Nr. 120668
Pump: selfpriming vanpump: flow rate max. litres 50 l/min max. pressure 5,0 bar Temperature max. 60 °C Inlet/outlet 1" ft cast iron Fluids oil Construction size 600x290x300 weight 28 kg Motor: Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 1,35/1,6 kW, Rated current (AC) 6,2/4,9 A rotation max. 1450/1700 min-1 Protection class IP55
Nominal voltage 230 V
Flow rate 50 l/min

Filter 90° for Diesel- and Oil pumps 1" f. thread

Depuroil
Art. Nr. 120669
Nominal voltage 230 V
Flow rate 25 l/min

Filtrol for Diesel and Oil , 230 V Mobile Filtering Unit with Spout Pipe

Filtroll
Art. Nr. 120658
Self Priming Vane Pump Viscomat 70 flow rate max. litres 25 l/min flow rate max. m³ 1,5 m³/h max. pressure 6 bar Inlet/outlet 1" ft x 1" ft By-pass valve Fluids max. viscosity 500 cst Material pump housing cast iron Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,75 kW, Rated current (AC) 4,6 A With cable and plug Equipment/Accessories : - Two step filtration: First stage 30µ with water absorption Second stage 5µ for impurities - Sturdy wheeled structure, large wheels - 3 m suction hose, 3/4" - 3 m discharge hose 3/4" with spout pipe Packaging 790x590x590 mm weight 42 kg
Flow rate 25 l/min
Nominal voltage 230 V

MobilFil UNISTAR-B Mobile Diesel/Oil-Filtration- and Transfer System

MobilFil
Art. Nr. 120667
Impellerpump Unistar 2000-B flow rate max. litres 25 l/min flow rate max. m³ 1,5 m³/h max. pressure 4 bar Inlet/outlet 1" mt Impeller Perbunan® (NBR) , Bush material Polyamid Mechanical seal Carbon/Keramik/FKM Pump housing aluminium (AlMgSi1) Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 3,8 A Starting capacitor 40 µF Operating capacitor 16 µF rotation max. 1400 min-1 Protection class IP55 , Operating mode S1 Equipment/Accessories : - Filter 10µ including replacement cartridge - Pressure Gauge - Suction Pipe - 2 x 2 m transparent spiral hose ¾" - Foot valve Packaging 600x290x300 mm 26 kg
Flow rate 25 l/min
Nominal voltage 230 V

Mobile Oil Changing Station 55 L Impellerpump UNISTAR/V 2000-A, 1400 rpm, 230 V

Mobile Oil Changing Station 55 L
Art. Nr. 132064
Impellerpump flow rate max. litres 15 l/min flow rate max. m³ 0,9 m³/h max. pressure 3 bar Inlet/outlet ¾" mt Impeller Viton® (FKM) , Bush material Polyamid Shaft sealing ring Viton® (FKM) Material pump housing Aluminium AIMgSi1 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 3,2 A rotation max. 1400 min-1, Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 Motor protection (thermal) 130 Equipment/Accessories : - UV resistant 55 L PE tank with lid, sieve and level scale - 2 Multifunction ball valves - 3 m discharge hose ½" (NW 13) with open ending - 3 m suction hose ½" (NW 13) with probe adapter - 4 Suction Probes: 1 x semi rigid probe 6 x 800 mm / 1 x semi rigid probe 8 x 800 mm 1 x rigid probe 6 x 650 mm / 1 x rigid probe 9 x 650 mm - Mounted on trolley with pneumatic wheels On option: - Flow meter K400 - Nozzle
Nominal voltage 230 V
Flow rate 15 l/min

Mobile Oil Changing Station 55 L Impellerpump UNISTAR/V 2000-B, 1400 rpm, 230 V

Mobile Oil Changing Station 55 L
Art. Nr. 132065
Impellerpump flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 3 bar Inlet/outlet 3/4"mt Impeller Viton® (FKM) , Bush material Polyamid Shaft sealing ring Viton® (FKM) Material pump housing Aluminium AIMgSi1 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,55 kW, Rated current (AC) 3,8 A rotation max. 1400 min-1, Material motorshaft 1.4104 Protection class IP55 , Operating mode S1 Motor protection (thermal) 130 Equipment/Accessories : - UV resistant 55 L PE tank with lid, sieve and level scale - 2 Multifunction ball valves - 3 m discharge hose ½" (NW 13) with open ending - 3 m suction hose ½" (NW 13) with probe adapter - 4 Suction Probes: 1 x semi rigid probe 6 x 800 mm / 1 x semi rigid probe 8 x 800 mm 1 x rigid probe 6 x 650 mm / 1 x rigid probe 9 x 650 mm - Mounted on trolley with pneumatic wheels On option: - Flow meter K400 - Nozzle
Flow rate 30 l/min
Nominal voltage 230 V

Oil Transfer Kit - VISCOMAT 230 , 230 V Oil pump with digital meter

Oil Transfer Kit - VISCOMAT 230 , 230 V
Art. Nr. 1206443
Selfpriming Gearpump Viscomat 230-m flow rate max. litres 14 l/min flow rate max. m³ 0,84 m³/h max. pressure 16 bar Inlet/outlet 1" ft (without flange) For oil viscosity up to max. 2000 cSt Adjustable by-pass valve Material pump housing cast iron Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 1,25 kW, Rated current (AC) 6 A rotation max. 1400 min-1, Operating mode S1 With cable and plug , Switch E/A Equipment/Accessories: Filter 90° Nozzle meter for oil K400 with flex.ext. Holding device for nozzle 1,5 m oil resistant hose ¾" with foot valve 4 m oil resistant delivery hose ½" Mounted on plate for wall fastening
Flow rate 14 l/min
Nominal voltage 230 V

Oil Transfer Kit - VISCOMAT 70, 230 Volt Oil pump with digital meter

Oil Transfer Kit - VISCOMAT 70, 230 Volt
Art. Nr. 120644
Plate mounted oil pump VISCOMAT 70 for wall fastening, 90° filter in the inlet side, 1,5 m oil resistant suction hose ¾" with foot valve, 4 m oil resistant delivery hose ½", nozzles for oils with digital meter K 400, holding device for nozzle and delivery hose
Flow rate 25 l/min
Nominal voltage 230 V

Oil Transfer Kit - VISCOMAT 70, 230 Volt Oil pump without digital meter

Oil Transfer Kit - VISCOMAT 70, 230 Volt
Art. Nr. 120644OZ
Plate mounted oil pump VISCOMAT 70 for wall fastening, 90° filter in the inlet side, 1,5 m oil resistant suction hose ¾" with foot valve, 4 m oil resistant delivery hose ½", nozzles for oils without digital meter, holding device for nozzle and delivery hose
Nominal voltage 230 V
Flow rate 25 l/min

Oil Transfer Kit - VISCOMAT 70, 400 Volt Oil pump with digital meter

Oil Transfer Kit - VISCOMAT 70, 400 Volt
Art. Nr. 120646
Plate mounted oil pump VISCOMAT 70 for wall fastening, 90° filter in the inlet side, 1,5 m oil resistant suction hose ¾" with foot valve, 4 m oil resistant delivery hose ½", nozzles for oils with digital meter K 400, holding device for nozzle and delivery hose
Nominal voltage 400 V
Flow rate 25 l/min

Oil Transfer Kit - VISCOMAT 90 , 230 V Oel pump with digital meter K400

Oil Transfer Kit - VISCOMAT 90 , 230 V
Art. Nr. 1206442
Selfpriming Vane Pump Viscomat 90-n flow rate max. litres 50 l/min flow rate max. m³ 3 m³/h max. pressure 5 bar Inlet/outlet 1" ft (without flange) For oil viscosity up to max. 500 cSt. With by-pass valve, but not adjustable Material pump housing grey cast iron Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 1,35 kW, Rated current (AC) 6,2 A rotation max. 1450 min-1, Operating mode S1 With cable and plug , Switch E/A Equipment/Accessories: 90° filter at pump inlet Nozzle meter for oil K400 with flex.ext. Holing device for nozzle 1,5 m oil resistent suction hose ¾" with foot valve 4 m oil resistant delivery hose ½" Mounted on plate for wall fastening
Flow rate 50 l/min
Nominal voltage 230 V

Servicecenter Mobil KOMPAKT Impellerpump UNISTAR/V 2000-A

Servicecenter Mobilcenter KOMPAKT
Art. Nr. 1320661
Motor: 230 V, 50Hz, 3,2 A 0,37 Kw, 1300 U/Min, IP:55 Pump: max. 15 Liter/Min., pressure max. 3 bar Connections ¾" mt Impeller and rotary shaft seal Viton® Pump housing made of aluminium Pump directly flanged onto motor shaft Equipment: 30 ltr. tank 2 multifunctional valves 3 m pressure hose 1/2" with open hose end 2 m suction hose 1/2" with stop valve and probe set as follows: 1 x semirigid probe 6 x 800 mm 1 x semirigrid probe 8 x 800 mm 1 x rigid probe 6 x 650 mm 1 x rigid probe 9 x 650 mm mounted on KOMPAKT trockles with pneumatic tyres bracket for probes on trolley
Nominal voltage 230 V
Flow rate 15 l/min

VISCOTROLL 200/2 Trolley with gear pump for decanting of oil

Viscotroll is the ideal solution for delivering oil from a drum anywhere in the workshop. ZUWA.
Art. Nr. P26300
Unit is equipped with a low noise, self priming gear pump. The pump works with constant flow rate and an even flow without pulsations. Nozzle with drop protection Accuracy ± 0,5 % 4 metres discharge hose 1/2" 1,5 metres suction hose Flow rate up to 9 litres per minute Viscosity up to 2000cSt
Flow rate 9 l/min
Nominal voltage 230 V

VISCOTROLL 200/2 w. counter K400, pressure switch Trolley with gear pump to siphon oil

Viscotroll is the ideal solution for delivering oil from a drum anywhere in the workshop. ZUWA.
Art. Nr. P26303
Unit is equipped with a low noise, self priming gear pump with pressure switch. The pump works with constant flow rate and an even flow without pulsations. Nozzle, drop protection and counter K400 Accuracy ± 0,5 % 4 metres discharge hose 1/2" 1,5 metres suction hose Flow rate up to 9 litres per minute Viscosity up to 2000cSt
Nominal voltage 230 V
Flow rate 9 l/min

VISCOTROLL 200/2 with flow meter K400 Trolley with gear pump for decanting of oil

Viscotroll is the ideal solution for delivering oil from a drum anywhere in the workshop. ZUWA.
Art. Nr. P26301
Supplied with self-priming pump, to ensure constant silent delivery and regular no-pulse flow. nozzle with anti-drip valve and flow meter K400 high precision ± 0,5 % 4 meter pressure hose ½" 1,5 meter suction hose flow rate until 9 l/min viscosity until 2000 cSt
Nominal voltage 230 V
Flow rate 9 l/min

VISCOTROLL 200/2 with pressure switch Trolley with gear pump for decanting of oil

Viscotroll is the ideal solution for delivering oil from a drum anywhere in the workshop. ZUWA.
Art. Nr. P26302
Supplied with self-priming pump, to ensure constant silent delivery and regular no-pulse flow. nozzle with anti-drip valve 4 meter pressure hose ½" 1,5 meter suction hose flow rate until 9 l/min viscosity until 2000 cSt
Nominal voltage 230 V
Flow rate 9 l/min

VISCOTROLL 70 Trolley with vane pump for oil transmission

Viscotroll 70
Art. Nr. P26310
The pump works with even flow rate and steady flow without pulsations. Nozzle 4 metres pressure hose 3/4" 1,5 metres suction hose Flow rate up to 25 l/min Viscosity up to 500 cSt
Nominal voltage 230 V
Flow rate 25 l/min

VISCOTROLL 70 with Flow Meter K33 Trolley with vane pump for oil transmission

Viscotroll 70
Art. Nr. P26311
Selfpriming Van Pump Viscomat 70 flow rate max. litres 25 l/min flow rate max. m³ 1,5 m³/h max. pressure 6 bar Inlet/outlet 1" ft For oil with max. viscosity 500 cSt adjustable bypass valvel Material pump housing cast iron Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 1,15 kW, Rated current (AC) 5,5 A Operating mode S1 , rotation max. 1450 min-1 With cable and plug , Switch E/A Accessories/Equipment: - Manual nozzle art.no. 31080 - Mechanical Flow Meter K33 - 4 m oil resistant discharge hose ¾" - 1,5 m oil resistant suction hose 1" with foot valvel - Trolley Packaging 1090 x 690 x 300 mm weight 36 kg
Nominal voltage 230 V
Flow rate 25 l/min