Flushing, venting and filling heat transfer medium into solar systems in one process. The latest member of the ZUWA filling stations family: small, easy to transport, fits upright into the trunk of a Volkswagen Rabbit!

Easy transport

  • A carrying handle on rearward side allows for single handed transport of the device, stairs or other obstacles cause no problems. The device sits closely to the body axis and can be carried very comfortable.
  • The telescopic handle with softgrip is height adjustable from 78 to 110 cm.
  • Device is absolutely leak-proof both in horizontal or vertical transport.

Fine filter with transparent casing

  • The filter at the pump inlet filters out solder or weld residues.
  • The transparent filter casing enables the detection of air bubbles in the heat transfer fluid.

Return hose connection in 90° angel

Return hose connection

Solarcheck Mobilcenter UNISTAR - Top equipment down to the smallest detail

  • Pump UNISTAR 2000-A
    Dry self-priming impeller pump with glycol resistant Perbunan impeller
  • High temperature resistant supply and return hose
    Hoses temperature resistant up to 100°C, threaded hose couplings with high-pressure crimped fittings
  • Drain valve on pressure side
    The manual drain valve at the pump outlet is used to release the pressure in the delivery hose after use. Thus the hose can be easily and quickly disconnected from the fittings
  • Ball valves at the hose ends
    The ball valves at the hose ends are leak-proof and allow for pre-filling of the hoses. No air from the hoses enters into the solar collectors during filling process.

Solarcheck Mobilcenter P80 - Proven and tested solar filling station for solar pros

  • Pump P80
    Self-priming robust centrifugal pump with small pump chamber
  • Temperature resistant supply and return hose
    Temperature resistant hoses up to 60°C, threaded hose couplings with high-pressure crimped fittings

Technical details

Solarcheck Mobilcenter UNISTAR 2000-A P 80
Pump dry self-priming impeller pump UNISTAR 2000-A with glycol resistant impeller self-priming centrifugal pump
flow rate max. 30 l/min* 31 l/min
working pressure max. 5 bar 5,9 bar
temperature max. 90° C 60° C
motor 230V/50 Hz with thermal motor protection, 110V/50Hz (UK) and 110V/60 Hz (USA/CAN) on option 230 V with thermal motor protection
hoses EPDM hose with ball valves for temperatures up to 100°C PVC tissue hose for temperatures up to 60°C
extras 2 m cable with plug 2 m cable with plug
tank UV resistant PE tank with wide lock-up opening, capacity indicator and stop valve at the outlet, content 30 litres UV resistant PE tank with wide lock-up opening, capacity indicator and stop valve at the outlet, content 30 litres
drain valve on pressure side
Cart robust welded chassis, powder-coated steel, telescopic handle with soft grip robust welded chassis, powder-coated steel, telescopic handle with soft grip
Dimensions (L x W x H) 760-1000-1100 x 490 x 510 Packaging dimensions: 800 x 400 x 500 (12 units per pallet for shipping) 760-1000-1100 x 490 x 510 Packaging dimensions: 800 x 400 x 500 (12 units per pallet for shipping)
Empty weight 20,9 kg 21,2 kg
Art.No. 134052V11 134053V11

Flow Direction Reversal SMC UNISTAR

Flussrichtungsumkehr
Art. Nr. 15122503
Consisting of: - Four-way ball valve with L-drilling to change the flow direction Material brass, shaft/bush PPS composite, O-ring EPDM - Return hose to canister - Max. fluid temperature 110° C weight 1,5 kg

Solarcheck Mobilcenter KOMPAKT P 80 , 230 V

Solarcheck Mobilcenter P80
Art. Nr. 134053V11
Centrifugal Pump flow rate max. litres 31 l/min flow rate max. m³ 1,86 m³/h max. pressure 5,9 bar Inlet/outlet 1" ft Impeller type brass, mechanical seal silicon carbide/graphite Material pump housing cast iron Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,75 kW, Rated current (AC) 5,5 A rotation max. 2850 min-1 Protection class IP44 , Operating mode S1 2 m cable and plug Equipment/Accessories : - Max. fluid temperature 60°C - 30 l UV resistant PE tank with filling level control and shut-off ball valve - 2 x 3m filling and flushing hose f. temperatures up to 60°C - Connection return hose 90° to avoid bending of hose - Filter in translucent cup - Chassis with adjustable telescopic handle H 78-110 cm - Carrying handle with soft grip on rearward side, pneumatic wheels - Removable axle and wheels for shipping Packing dimension 80 x 40 x 50 cm weight 23,4 kg On option: Screw cap art. 805531 and filter bag pack of ten art. 132003
Discharge pressure 5,9 bar
Flow rate 31 l/min
max. filling content 30 l

Solarcheck Mobilcenter KOMPAKT P 90 , 230 V

Zum Spülen und Füllen von hohen Gebäuden
Art. Nr. 134060-V11
Centrifugal Pump flow rate max. litres 36 l/min flow rate max. m³ 2,16 m³/h max. pressure 9,0 bar Inlet/outlet ¾” ft Impeller material brass Mechanical seal graphite/ceramic Material pump housing cast iron Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,75 kW, Rated current (AC) 5,0 A rotation max. 2900 min-1 Protection class IP44 . Operating mode S1 2 m cable with plug Equipment/Accessories : - Max. fluid temperature 80°C - 30 l UV resistant PE tank with level scale and shut-off ball valves at outlet - 2 x 3 m temperature resistant EPDM hose ¾” for temperatures up to 100°C - Filter in translucent cup - Chassis with adjustable telescopic handle 78 - 110 cm - Carrying handle with soft grip on reward side pneumatic wheels Packing dimensions 800 x 400 x 500 mm weight 21 kg On option: Cable remote control / Radio remote control
Discharge pressure 9,0 bar
Flow rate 36 l/min
max. filling content 30 l

Solarcheck Mobilcenter KOMPAKT UNISTAR 2000-A, 230 V

Solarchek Mobilcenter Unistar
Art. Nr. 134052V11
Impellerpump flow rate max. litres 30 l/min flow rate max. m³ 1,8 m³/h max. pressure 5 bar Impeller Perbunan® (NBR) Bush material Polyamid Shaft sealing ring Perbunan® (NBR) Material pump housing aluminum EN AW-6082/AC-43400 Electric motor Voltage (AC) 230 V, Nominal frequency 50 Hz Nominal power 0,37 kW, Rated current (AC) 3,2 A rotation max. 2800 min-1 Protection class IP55 , Operating mode S1 Cable / plug H07RN-F 2m Equipment/Accessories : - Max. fluid temperature 90°C - 30 l UV resistant PE tank with filling level control and shut-off ball valve - 2 x 3m temperatur resistant EPDM hose ½" for temperatures up to 100°C - Ball valves on both hose ends, (no leaking during transport) - Connection return hose 90° to avoid bending of hose - Filter in translucent cup - Pressure relieve valve - Chassis with adjustable telescopic handle H 78-110 cm - Carrying handle with soft grip on rearward side, pneumatic wheels - Removable axle and wheels for shipping Packing dimension 80 x 40 x 50 cm weight 23,4 kg On option: Screw cap art. 805531 and filter bag pack of ten art. 132003
max. filling content 30 l
Discharge pressure 5 bar
Flow rate 30 l/min